Nippon Labs 30POW-10W1-01206-GN 18 AWG Green Power Cord NEMA 5-15P to C13 6 ft
- Power
- Green
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
One-foot green 18 AWG SJT cord with NEMA 5-15P to IEC-60320-C13 connectors, rated 10A at 125V for monitors, computers and other C14-inlet devices
This 1-foot green power cord connects a standard NEMA 5-15P wall plug to an IEC-60320-C13 inlet. It is rated for 10 amps at 125 volts and suits monitors, computers, printers, scanners, TVs and sound systems. The short length keeps cable clutter low in tight workspaces.
The cord uses SJT 18 AWG three-conductor wire with fully molded connectors for strain relief and durability. Its green jacket allows quick visual identification among other cables on a busy surge protector or rack. UL, cUL and CSA listings confirm compliance with North American safety standards.
As a passive cable assembly it generates no heat, noise or power draw of its own. The 18 AWG conductors handle the rated 10-amp load without measurable temperature rise under normal use. All materials meet RoHS and REACH directives for restricted substances.
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-01201-GN |
| Type | Power |
| Color | Green |
| Length | 1 Foot |
| Connector Number | 2 |
| Connector Detail | NEMA 5-15P to IEC-60320-C13 10A/125V |
| Specifications | NEMA 5-15P to IEC-60320-C13 18 AWG., SJT, 10A, 125V |
| Wire Gauge | 18 AWG |
| Conductor | SJT 18 AWG. x 3C |
| Features | Typically used for monitors, computers, printers, scanners, TVs, sound systems, and many more devices and appliances that have the IEC-60320-C14 inlet. Ideal solution for replacing damaged, overused or missing power cords. This heavy duty 18 AWG power cord is fully molded for durability. Colored cord is designed for easy identification in a crowded surge protector or workstation. UL, cUL listed and CSA approved. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.09 kg |
| Package size | 127 × 51 × 25 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The cord is rated for 10A at 125V, so it safely powers typical desktop PCs, monitors, printers and similar equipment that use a C14 inlet.
At one foot long with a fully moulded strain relief on each end, it only needs a few centimetres of depth behind the device to sit without sharp bends.
Push the C13 connector straight into the C14 inlet until the latch clicks; the common mistake is stopping before the latch engages, leaving a loose connection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?