We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft power splitter cord with NEMA 5-15P plug branching to two IEC-60320-C13 connectors

Nippon Labs

Nippon Labs 30P-10W1-185P13Y-10 18 AWG 10 ft NEMA 5-15P to IEC-60320-C13 x 2 power splitter cord

SKU CH-2V9J-7ZTJ2 MPN 30P-10W1-185P13Y-10

Splits one NEMA 5-15P outlet into two IEC-60320-C13 connectors for powering dual devices from a single socket

  • TypePower Splitter
  • ColorBlack
  • Length10 ft.
  • Connector Number2
  • Connector DetailNEMA 5-15P to IEC-60320-C13 x 2
  • SpecificationsConnector A: NEMA 5-15P Connector B: IEC-60320-C13 x 2 Condu
  • Power two devices from one outlet with NEMA 5-15P to dual IEC-60320-C13 split
  • Reduce cable clutter using a single 10 ft cord instead of two separate leads
  • Durable fully-molded SJT 18 AWG construction withstands daily connect and disconnect cycles
  • UL listed safety certification confirms compliance with recognised electrical standards
  • RoHS and REACH compliant materials restrict hazardous substances in all components

Splitter cord for two C14 inlets

This 10 ft power splitter connects a single NEMA 5-15P plug to two IEC-60320-C13 connectors. The 18 AWG SJT cable carries a 10A/125V rating and is fully moulded for durability. It is UL listed and compliant with RoHS and REACH directives. The black cord replaces two separate mains leads with one tidy run.

Suits dual-device desks and racks

Users with a monitor, PC, printer, scanner, TV or audio gear that all use C14 inlets can power a pair from one wall outlet. Builds that need more than two devices, a different plug standard, or a higher amperage circuit should choose another solution. The 10 ft length fits typical desk or rack spacing without excess slack.

Steady load on 18 AWG conductors

Under continuous draw the 18 AWG SJT conductors run warm but stay within their 10A rating when total current from both outlets does not exceed that limit. The fully moulded strain reliefs resist fatigue from repeated insertion cycles. Voltage drop over the 10 ft run remains modest for typical office and home electronics loads.

Highlights

  • Power two devices from one outlet with NEMA 5-15P to dual IEC-60320-C13 split
  • Reduce cable clutter using a single 10 ft cord instead of two separate leads
  • Durable fully-molded SJT 18 AWG construction withstands daily connect and disconnect cycles
  • UL listed safety certification confirms compliance with recognised electrical standards
  • RoHS and REACH compliant materials restrict hazardous substances in all components

Specifications

BrandNippon Labs
Model30P-10W1-185P13Y-10
TypePower Splitter
ColorBlack
Length10 ft.
Connector Number2
Connector DetailNEMA 5-15P to IEC-60320-C13 x 2
SpecificationsConnector A: NEMA 5-15P
Connector B: IEC-60320-C13 x 2
Conductor: SJT 18 AWG. x 3C
Amp/Voltage Rating: 10A/125V
Wire Gauge18 AWG
ConductorSJT 18 AWG. x 3C
FeaturesTypically used for monitors, computers, printers, scanners, TVs, sound systems, and many more devices and appliances that have the IEC-60320-C14 inlet.
Power two electronic devices with a single outlet.
Ideal solution for eliminating extra bulky cords and reducing clutter.
This heavy duty 18 AWG power cord is fully molded for durability.
The cable is UL listed.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.32 kg
Package size191 × 76 × 51 mm

Questions about this item

What type of inlet must each device have to connect to the two IEC-60320-C13 connectors on this splitter?

Each device needs an IEC-60320-C14 inlet to accept the C13 plugs.

Can I plug this 10 A rated splitter into a standard 15 A NEMA 5-15R wall outlet alongside older equipment?

Yes, the NEMA 5-15P plug fits a standard 15 A receptacle and the splitter draws up to 10 A at 125 V.

How can I verify the cord is operating correctly after connecting two devices?

Confirm both devices power on normally and the fully molded cable and connectors stay cool during use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.