We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs 30P-10W1-161413Y-14 power splitter cord 14" C14 to C13 x2 16 AWG

SKU CH-466W-X35C0 MPN 30P-10W1-161413Y-14

Split one C14 plug into two C13 receptacles, powering two devices from a single outlet with 16 AWG SJT cable rated 13A at 250V

  • TypePower Splitter
  • ColorBlack
  • Length14"
  • Connector Number2
  • Connector DetailEC-60320-C14 to IEC-60320-C13 x 2
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 x 2 Co
  • Power two devices from one outlet with a C14 to dual C13 splitter
  • Reduce cable clutter in racks using a compact 14 inch Y cord
  • Durable fully moulded 16 AWG SJT construction handles 13 A at 250 V
  • UL listed safety certification for reliable operation
  • RoHS and REACH compliant materials meet environmental standards

Power distribution for rack equipment

This 14 inch splitter connects one IEC-60320-C14 inlet to two IEC-60320-C13 outlets, letting a single PDU or UPS socket feed two devices. The 16 AWG SJT conductors are rated for 13 A at 250 V and carry UL listing plus RoHS and REACH compliance. It suits administrators who want to consolidate power feeds in a cabinet without adding bulk.

Replaces twin cords from one source

Instead of running two separate C14-to-C13 leads from a power strip, this Y cable halves the cord count while keeping each leg fully moulded for strain relief. The jump is worthwhile when rack depth is tight and cable management arms are already crowded with data cables. Builders who need more than two branches from one inlet should look at a multi-outlet strip instead.

Steady load on both branches

Under continuous dual-device draw the 16 AWG copper and SJT jacket maintain temperature within spec because the 13 A rating applies to the combined load. The fully moulded connectors resist loosening from vibration in a data centre aisle. Installations that regularly approach the ampere limit should verify the upstream breaker and PDU rating rather than relying on the cord alone.

Highlights

  • Power two devices from one outlet with a C14 to dual C13 splitter
  • Reduce cable clutter in racks using a compact 14 inch Y cord
  • Durable fully moulded 16 AWG SJT construction handles 13 A at 250 V
  • UL listed safety certification for reliable operation
  • RoHS and REACH compliant materials meet environmental standards

Specifications

BrandNippon Labs
Model30P-10W1-161413Y-14
TypePower Splitter
ColorBlack
Length14"
Connector Number2
Connector DetailEC-60320-C14 to IEC-60320-C13 x 2
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13 x 2
Conductor: SJT 16 AWG. x 3C
Amp/Voltage Rating: 13A/250V
Wire Gauge16 AWG
ConductorSJT 16 AWG. x 3C
FeaturesPower two electronic devices such as monitors, computers, printers, scanners with a single outlet.
Split one C14 plug into two C13 receptacles.
Ideal solution for eliminating extra bulky cords and reducing clutter in a data center.
This heavy duty 16 AWG power cord is fully molded for durability.
The cable is UL listed.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.10 kg
Package size127 × 51 × 25 mm

Questions about this item

Will the 14 inch length and C14 plug reach my PDU and two C13 devices without strain?

The cord is 14 inches long with a C14 plug on one end and two C13 receptacles on the other, so measure the distance from your PDU outlet to each device inlet to confirm fit.

How do I connect the splitter correctly, and what is the common mistake?

Insert the C14 plug fully into the PDU or UPS outlet until it clicks, then push each C13 connector into the device inlets until seated; the frequent error is leaving one side partially inserted, which can cause intermittent power.

When should I replace this 16 AWG SJT splitter cord?

Replace it if the jacket shows cuts, the moulded ends crack, pins become discoloured or loose, or the cord feels warm during normal 13 A / 250 V operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.