We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.1 cable with Type-C and Type-A male connectors, 10 ft length

Nippon Labs

Nippon Labs 20USB3-10CMAM-G USB 3.1 Type-C to Type-A cable 10 ft 24 AWG 10 Gbps

SKU CH-ZCHW-KNVXH MPN 20USB3-10CMAM-G

A 10 ft USB 3.1 Gen 2 cable linking a USB-C device to a USB-A port at up to 10 Gbps with 3 A charging

  • TypeUSB 3.1
  • Connector TypeUSB C Male to USB A Male
  • ColorBlack
  • Cable Length10 ft.
  • Connector Number2
  • Terminal GenderMale to Male

Cable Length 10 Feet

  • Connect USB-C devices to USB-A ports for data and charging
  • Transfer files at up to 10 Gbps with USB 3.1 Gen 2
  • Works with existing USB 3.0, 2.0 and 1.1 equipment
  • Reversible Type-C plug inserts either way up
  • 10 ft length gives flexible placement for desks or charging stations

USB 3.1 Type-C to Type-A cable

This ten-foot cable links a USB-C computer, tablet or smartphone to a USB-A host, charger or peripheral. It supports data rates up to 10 Gbps and delivers up to three amps for simultaneous sync and charge. Gold-plated connectors resist corrosion over repeated insertions. The black jacket is flexible for routing behind desks or along baseboards.

Check your ports before ordering

Verify that the source device has a USB-C port and the destination has a USB-A port; the cable will not fit reversed orientations. Confirm the host can supply the current your peripheral requires, as the cable passes through whatever the port provides. The assembly is backward compatible with USB 3.0, 2.0 and 1.1 hosts, so older ports will work at their native speeds. No driver installation is needed for standard mass-storage or charging functions.

Build quality and daily use

Twenty-four AWG power conductors and twenty-eight AWG signal pairs handle the rated throughput without excessive stiffness. The reversible Type-C plug eliminates orientation failures in low light or tight spaces. Strain-relief mouldings at both ends protect the solder joints from bending stress during frequent connect-disconnect cycles. The ten-foot length reaches wall outlets or rear-panel ports without tension, yet coils neatly for storage.

Highlights

  • Connect USB-C devices to USB-A ports for data and charging
  • Transfer files at up to 10 Gbps with USB 3.1 Gen 2
  • Works with existing USB 3.0, 2.0 and 1.1 equipment
  • Reversible Type-C plug inserts either way up
  • 10 ft length gives flexible placement for desks or charging stations

Specifications

BrandNippon Labs
Model20USB3-10CMAM-G
TypeUSB 3.1
Connector TypeUSB C Male to USB A Male
ColorBlack
Cable Length10 ft.
Connector Number2
Terminal GenderMale to Male
Wire Gauge24 AWG
SpecificationsConnector A: USB Type-C Male
Connector B: USB Type-A Male
Data Transfer Speed: 10 Gbps
FeaturesConnect a USB-C equipped computer, tablet or smartphone to a computer, charger or other peripheral with a USB-A port.
Compatible with MacBook (2015 and newer), Chromebook Pixel, Samsung Galaxy (S8, S8+ and newer) and other devices with a USB-C port.
Sync and charge your USB Type-C equipped device simultaneously.
Support USB 3.1 communication and features.
Backward compatible with USB 3.0, 2.0, and 1.1.
Support data transfer rate up to 10Gbps.
USB Type-C features a smaller and reversible connector that makes it easier to plug in.
Shipping weight0.16 kg
Package size178 × 178 × 25 mm

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 10 ft cable come with any adapters or do I need to buy them separately?

The package contains the USB Type-C male to USB Type-A male cable only; no adapters are included.

Should I choose the 24 AWG or 28 AWG version for a 10 ft run at 10 Gbps?

This model uses 24 AWG for the power pair and 28 AWG for the data pair, a combination built for the full 10 ft length at 10 Gbps.

Will the 10 Gbps rating hold when I plug the cable into a USB 3.0 port on my 2015 MacBook?

The cable is backward compatible with USB 3.0, 2.0 and 1.1, so it will work but the link will negotiate to the port's 5 Gbps limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.