Nilight 90223A USB Charger 12V QC3.0 Voltmeter Switch SAE 10A Fuse 6.8A
Handlebar-mounted USB-A and USB-C charger with built-in voltmeter, on-off switch and SAE inline 10 A fuse for 12 V systems
- Compatible Phone ManufacturerAll equipments with USB and Type C port
- Compatible Phone ModelAll equipments with USB and Type C port
- ColorUSB+PD Type C Charger Motorcycle
- AdapterUSB
- Standard USB Port2
- Output Volt12 volts
- Dual USB and Type‑C ports deliver QC 3.0 fast charging up to 5V 3.4A
- Built‑in LED voltmeter shows real‑time battery voltage at a glance
- Independent on‑off switch prevents parasitic battery drain when not in use
- SAE inline 10A fuse protects the circuit from overloads
- Waterproof rubber caps seal ports and switch for all‑weather riding
Motorcycle USB charger with voltmeter
The Nilight 90223A mounts on a 7/8 inch handlebar and provides one USB-A and one Type-C port for phones, tablets or other USB-powered gear. It draws 12 V from the bike's electrical system and includes an SAE inline 10 A fuse for circuit protection. A waterproof rubber cap covers the ports and switch when not in use.
Sustained output with QC 3.0
Under continuous load the charger delivers up to 6.8 A total across both ports using QC 3.0 profiles of 5 V 3.4 A, 9 V 2.5 A and 12 V 2 A. The built-in LED voltmeter shows real-time battery voltage while the unit is switched on, letting you monitor electrical health during long rides. An independent on-off switch cuts power completely to prevent parasitic drain when parked.
Weather-resistant build and wiring
The housing is sealed against rain and dust, and the SAE connector simplifies connection to a battery tender lead or direct battery terminals. The 10 A fuse is replaceable without tools, and the voltmeter display turns off automatically when the switch is off. Riders who need more than two simultaneous ports or a higher total current will need a different solution.
Highlights
- Dual USB and Type‑C ports deliver QC 3.0 fast charging up to 5V 3.4A
- Built‑in LED voltmeter shows real‑time battery voltage at a glance
- Independent on‑off switch prevents parasitic battery drain when not in use
- SAE inline 10A fuse protects the circuit from overloads
- Waterproof rubber caps seal ports and switch for all‑weather riding
Specifications
| Brand | Nilight |
|---|---|
| Model | 90223A |
| Part Number | 90223A |
| Compatible Phone Manufacturer | All equipments with USB and Type C port |
| Compatible Phone Model | All equipments with USB and Type C port |
| Color | USB+PD Type C Charger Motorcycle |
| Adapter | USB |
| Standard USB Port | 2 |
| Output Volt | 12 volts |
| Output Amp | 2.5 amps |
| Support Volt | 12 volts |
Questions about this item
Does the Nilight 90223A generate noticeable heat or drain the battery when left switched on all day?
The built-in on-off switch cuts power completely, so the voltmeter LEDs go dark and the 10 A SAE fuse circuit draws no current when you are not charging.
What mounting hardware or wiring must I already have to install this charger on a 7/8-inch handlebar?
The unit clamps directly to a 7/8-inch bar and connects through the supplied SAE plug with an inline 10 A fuse; no extra brackets or adapters are required.
Will the QC 3.0 ports charge older phones that only accept 5 V 2.4 A or 3.1 A?
Yes, the USB and Type-C ports automatically negotiate 5 V 3.4 A, 9 V 2.5 A or 12 V 2 A, so legacy devices still charge at their maximum supported rate.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011546BTC
In stock
