Nilight 4PCS USB Interior Car Light Strips RGB Remote 48 LED IP67
Four USB-powered strips with 48 RGB LEDs change colour to music or voice, controlled by an IR remote
- Weight0.29 kilograms
- Syncs colours to music and voice for immersive cabin ambience
- USB 5 V power fits any car port and home TV setups
- IP67 rubber tubing shields strips from rain and road spray
- 48 SMD5050 LEDs deliver bright uniform 6000 K illumination
- Wireless IR remote adjusts colour and brightness from your seat
Universal USB RGB Interior Lighting Kit
This four-strip kit adds customisable colour to any vehicle cabin, TV bias lighting setup or home entertainment area. Each strip holds twelve SMD5050 LEDs for a total of forty-eight LEDs driven from a single 5 V USB port. The wireless IR remote lets drivers and passengers change colour and brightness without reaching for a dashboard switch.
IP67 Sealed Strips with Double-Sided Tape Mounting
Flexible rubber tubing protects every LED against water, dust and minor impacts, meeting the IP67 rating for wet or foggy conditions. The ultra-thin ABS housings adhere directly to cleaned interior panels using pre-applied 3M-style tape, so no drilling or brackets are required. A smart USB controller plugs into any 5 V USB-A socket and draws ten watts maximum.
Check USB Power Availability
Verify that your vehicle or display offers a free USB-A port capable of supplying 5 V at two amps. The mounting tape bonds best to smooth, grease-free plastic or painted metal; textured carpet or oily surfaces may reduce adhesion. Buyers needing longer runs, higher LED density or hard-wired 12 V installation should consider alternative products.
Highlights
- Syncs colours to music and voice for immersive cabin ambience
- USB 5 V power fits any car port and home TV setups
- IP67 rubber tubing shields strips from rain and road spray
- 48 SMD5050 LEDs deliver bright uniform 6000 K illumination
- Wireless IR remote adjusts colour and brightness from your seat
Specifications
| Weight | 0.29 kilograms |
|---|
Questions about this item
What USB power standard does the smart port use, and what voltage does it deliver?
The smart USB port supplies DC 5 V at up to 10 W, matching the strip specification.
How are the four light strips secured inside the vehicle?
Each strip has a double-sided adhesive backing that bonds to a cleaned floor or dashboard surface.
Which step in the installation sequence is most often missed?
Removing the battery cover from the IR remote before attempting to pair it with the controller.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



