We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four flexible LED strips with USB power and remote control

Nilight 4PCS 48 LED Interior Lights RGB Remote Control IP67 Waterproof

SKU CH-QZ1C-QB5JM

Four USB-powered RGB strips with 48 LEDs sync to music and respond to an IR remote, IP67 waterproof for interior or under-dash use

  • Weight0.29 kilograms
  • Sound-active lighting shifts colour with music rhythm
  • USB-powered 5 V strips install without wiring
  • IP67-rated tubing withstands rain and splashes
  • 48 SMD 5050 LEDs deliver 6000 K brightness
  • Wireless IR remote adjusts colour and dimming

Four-piece RGB kit with 48 LEDs

This set includes four light strips containing twelve 5050 SMD LEDs each, powered from a 5 V USB port. The strips are wrapped in flexible rubber tubing rated IP67 for water and dust resistance. A wireless infrared remote lets you change colours and brightness without wiring a switch. The kit suits drivers who want plug-and-play cabin accent lighting.

Low heat and silent operation

Each strip draws a total of 10 W at 5 V, so the LEDs run cool to the touch during normal driving. There are no moving parts, fans or pumps, making the installation completely silent. The ABS housing resists vibration and minor impacts, keeping output stable on rough roads. Power comes from any standard USB socket, avoiding extra wiring.

Consistent colour under continuous use

The 6000 K LEDs maintain uniform brightness and colour mixing over long periods because the rubber sleeve protects the chips from moisture and corrosion. Sound-active mode reacts to music or voice without lag, and the remote retains the last setting after the ignition cycles off. Buyers needing longer runs, higher lumen output or hard-wired 12 V integration will need a different kit.

Highlights

  • Sound-active lighting shifts colour with music rhythm
  • USB-powered 5 V strips install without wiring
  • IP67-rated tubing withstands rain and splashes
  • 48 SMD 5050 LEDs deliver 6000 K brightness
  • Wireless IR remote adjusts colour and dimming

Specifications

Weight0.29 kilograms

Questions about this item

How do I install the four LED strips and which step is often missed?

Plug the smart USB port into a 5 V DC USB socket, clean the mounting surface, peel the double-sided tape on each strip and press them in place; the step many forget is removing the battery cover from the IR remote before first use.

What maintenance or replacement will the kit need later?

The IR remote uses a replaceable button cell that will eventually run out; the LED strips themselves are sealed in IP67-rated rubber tubing and have no user-serviceable parts.

What limit appears first during extended use?

The system draws 10 W at 5 V DC, so the USB power source’s current limit is the first constraint under sustained operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.