Nilight 48 LED Multicolor Car Strip Light Kit 4pcs USB Sound Active IR Remote
Four USB-powered strips with 48 multicolour LEDs change colour to music or voice and are controlled by an IR remote
- Weight0.29 kilograms
- Sound-active LEDs pulse with music rhythm via built-in microphone
- Four USB-powered strips with 48 total SMD5050 LEDs at 6000 K colour temperature
- IP67 waterproof tubing protects against rain and fog for interior or exterior use
- Wireless IR remote adjusts colour and brightness without reaching under the dash
- Peel-and-stick double-sided tape enables plug-and-play installation in minutes
Automotive USB LED kit
This 4-piece LED strip kit plugs into any DC 5 V USB port and adds multicolour interior lighting to cars, trucks or home TV setups. It targets drivers who want ambient cabin light that reacts to music and owners who need simple plug-and-play accent lighting without wiring into the vehicle electrical system.
Plug-and-play cabin integration
Each strip draws power directly from a standard USB socket, so no fuse-tap or hard-wiring is required. The double-sided tape backing adheres to clean interior surfaces, freeing the installer from drilling or bracket mounting while leaving the vehicle wiring untouched.
48 SMD5050 LEDs across four strips
The kit delivers 48 total LEDs grouped as 12 per strip at 6000 K colour temperature, suitable for footwell glow, dash accents or TV bias lighting. IP67-rated tubing handles rain and condensation, but the 10 W total draw limits brightness for high-output underglow or exterior flood applications.
Highlights
- Sound-active LEDs pulse with music rhythm via built-in microphone
- Four USB-powered strips with 48 total SMD5050 LEDs at 6000 K colour temperature
- IP67 waterproof tubing protects against rain and fog for interior or exterior use
- Wireless IR remote adjusts colour and brightness without reaching under the dash
- Peel-and-stick double-sided tape enables plug-and-play installation in minutes
Specifications
| Weight | 0.29 kilograms |
|---|
Questions about this item
Does the 10 W draw from a 5 V USB port limit how long the 48 LEDs can stay on?
The kit draws 10 W at DC 5 V, so a standard 5 V USB port supplying at least 2 A will run all four strips continuously without tripping the port's current limit.
How hot do the SMD5050 strips and the smart USB controller get after hours of music-sync use?
The IP67-sealed rubber tubing and ABS housing dissipate the 10 W load across 48 LEDs; the strips stay warm but not hot, and the USB controller remains comfortable to touch during extended operation.
My car only has a 12 V accessory socket — what extra part do I need to power this 5 V kit?
You need a 12 V to 5 V USB adapter or a car charger that provides a DC 5 V USB-A port capable of 2 A; the included smart USB plug connects directly to that port.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



