We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 90-degree street elbow with fitting and cup ends

Nibco, Inc.

Nibco, Inc. U6072I 3/4" FTG x Cup 90° Intermediate Radius Elbow

SKU CH-RTAB-DT3WB MPN U6072I

A 90-degree intermediate-radius copper street elbow connects 3/4-inch tube to 3/4-inch fitting for air, gas or potable water up to 582 psi at 100 degrees F

  • TypeDrain Components
  • MaterialHAWA
  • Wrot copper construction resists corrosion in potable water systems
  • 90-degree intermediate radius elbow enables smooth directional changes
  • FTG by cup connection fits 3/4-inch copper tube directly
  • Rated for 582 psi at 100 degrees F for high-pressure lines
  • Withstands temperatures up to 400 degrees F for hot water service

Copper 90-degree intermediate radius elbow

This wrot copper fitting connects 3/4 inch nominal tube on both ends using a FTG-by-cup sweat joint. It is rated for air, gases and potable water systems up to 582 psi at 100 degrees Fahrenheit. The intermediate radius bend changes flow direction smoothly without sharp turns.

Sustained pressure and temperature performance

The fitting withstands continuous operation at 582 psi and temperatures up to 400 degrees Fahrenheit. Wrot copper construction resists deformation under long-term thermal cycling and pressure stress. No degradation of the sweat joint integrity occurs within these rated limits.

Sweat joint installation constraints

A torch-heated sweat connection requires clean tube ends and compatible flux for a leak-free seal. The 7/8 inch outer diameter on each side matches standard 3/4 inch copper tube. Installation must follow local plumbing codes for potable water and gas applications.

Highlights

  • Wrot copper construction resists corrosion in potable water systems
  • 90-degree intermediate radius elbow enables smooth directional changes
  • FTG by cup connection fits 3/4-inch copper tube directly
  • Rated for 582 psi at 100 degrees F for high-pressure lines
  • Withstands temperatures up to 400 degrees F for hot water service

Specifications

TypeDrain Components
MaterialHAWA
BrandNibco
ModelU6072I 3/4

Questions about this item

How does the wrot copper elbow handle heat when hot water runs through it all day?

The fitting is rated for continuous service up to 400 Degrees F, so it will not soften or leak under normal hot-water circulation temperatures.

What tools and materials must I already have to install this 90-degree street elbow?

You need a propane torch, lead-free solder, flux, emery cloth and two lengths of 3/4 in copper tube with 7/8 in outside diameter to sweat the FTG and cup ends.

Will this intermediate-radius elbow mate with the 3/4 in copper pipe already in my walls?

Yes, both ends are sized for 3/4 in nominal copper tube with a 7/8 in outside diameter, matching standard residential plumbing already in place.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.