We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 90-degree elbow fitting, 3/4 inch, smooth finish

Nibco, Inc.

Nibco, Inc. U607 3/4" Copper 90° Elbow Trap

SKU CH-TNEH-D8XJ0 MPN U607

A 3/4 inch wrot copper 90-degree close rough elbow rated to 582 psi at 100 degrees F and compliant with ASME/ANSI B 16.22

  • TypeDrain Components
  • 90-degree close rough elbow directs flow in tight spaces
  • Wrought copper construction resists corrosion across -20 to 400 °F range
  • C x C solder connection fits 3/4 in nominal tube with 7/8 in outside diameter
  • Rated to 582 psi at 100 °F for reliable pressure performance
  • Meets ASME/ANSI B 16.22 standard for drain component quality

3/4" Copper 90° Elbow Trap

This 3/4 inch nominal wrot copper elbow creates a 90 degree turn in drainage systems. It uses a close rough C x C tube fitting connection with a 7/8 inch outside diameter. The fitting meets ASME/ANSI B 16.22 standards for plumbing installations.

For copper drainage systems needing tight turns

Suits installers joining 3/4 inch copper tube in drain, waste or vent lines where a close radius elbow is required. Not for builders who need a long radius sweep or a fitting rated above 582 psi at 100 degrees F. Not for systems operating below -20 degrees F or above 400 degrees F.

Simple solder installation with standard tools

Clean tube ends and fitting sockets, apply flux, assemble and solder using lead-free alloy. The close rough design leaves minimal clearance for soldering in confined spaces. Overheating can anneal the copper and reduce pressure capacity at the joint.

Highlights

  • 90-degree close rough elbow directs flow in tight spaces
  • Wrought copper construction resists corrosion across -20 to 400 °F range
  • C x C solder connection fits 3/4 in nominal tube with 7/8 in outside diameter
  • Rated to 582 psi at 100 °F for reliable pressure performance
  • Meets ASME/ANSI B 16.22 standard for drain component quality

Specifications

TypeDrain Components
BrandNibco
ModelU607 3/4

Questions about this item

What copper tube size must I already have for the U607 3/4" elbow to fit?

The elbow accepts 3/4 inch nominal copper tube with a 7/8 inch outside diameter on both ends.

Can the U607 90° elbow handle the same pressure and temperature range as my existing ASME B16.22 copper piping?

Yes, it is rated to 582 psi at 100 °F and operates from -20 °F to 400 °F under the same ASME/ANSI B16.22 standard.

How can I verify the U607 elbow is correctly soldered and leak-free after installation?

Pressurise the system up to 582 psi at 100 °F and inspect both C x C joints for any sign of leakage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.