We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small bronze ball valve with lever handle and threaded ends

Nibco, Inc.

Nibco, Inc. NL99014 1/4" FNPT Bronze Ball Valve 2-Way PTFE Seat

SKU CH-B5PZ-ENG4G

Manual two-way bronze ball valve with PTFE seat and 600 psi pressure rating

  • TypeOther
  • Manual two-way flow control with full-port bronze body
  • 600 psi pressure rating for water and steam service
  • Silicon bronze ball resists corrosion in plumbing systems
  • Lever handle allows quick quarter-turn operation
  • 1/4 inch FNPT connection fits standard piping

Manual Two-Way Bronze Ball Valve

The Nibco NL99014 is a manual two-way bronze ball valve built for water service. It uses a straight, two-piece body with a full-port silicon-bronze ball and a lever handle. The valve connects with 1/4-inch FNPT threads on each side.

PTFE Seat Material

The PTFE seat provides chemical compatibility and tight shut-off for water applications. It supports a maximum operating pressure of 600 psi and the same rating for steam service. The valve is not rated for combustible gas or vacuum duty.

600 psi Pressure Rating

The 600 psi maximum operating pressure decides whether this valve fits the system design. Buyers who need a higher pressure rating or a combustible-gas certification should select a different model.

Highlights

  • Manual two-way flow control with full-port bronze body
  • 600 psi pressure rating for water and steam service
  • Silicon bronze ball resists corrosion in plumbing systems
  • Lever handle allows quick quarter-turn operation
  • 1/4 inch FNPT connection fits standard piping

Specifications

BrandNIBCO
TypeOther

Questions about this item

Will the PTFE seat need replacement over time?

The PTFE seat is designed for long service in water applications up to 600 psi, but wear depends on cycle frequency and water quality; inspect periodically and replace if leakage appears.

What pressure limit is reached first during continuous operation?

The valve is rated for 600 psi maximum operating pressure and 600 psi steam pressure, so the 600 psi ceiling is the first limit encountered under sustained use.

Does the bronze body and lever handle get hot or noisy when the valve runs all day?

Bronze conducts heat from the media, so the body and lever will warm to fluid temperature; the valve itself has no moving parts that generate noise during steady flow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.