We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat cup ends, two half-inch and one three-quarter-inch, shiny metallic finish

Nibco, Inc.

Nibco, Inc. C611BH 1/2x1/2x3/4 Copper Reducing Tee

SKU CH-NNDB-FS4AW MPN C611BH

A copper reducing tee connects 1/2 in. and 3/4 in. tubing for potable water systems

  • TypeDrain Components
  • Connects three pipe sizes with one wrot-copper reducing tee
  • Sweat-joint cups on all three outlets for leak-free soldering
  • Wrot copper construction resists corrosion in potable-water systems
  • Reduces from 3/4 in to dual 1/2 in branches for flexible layouts
  • Lead-free copper alloy approved for drinking-water installations

Nibco 1/2x1/2x3/4 Copper Reducing Tee

This sweat fitting tee connects three copper tubes in a reducing configuration for potable water systems. Two outlets accept 1/2 inch nominal tube with 5/8 inch outer diameter while the third accepts 3/4 inch nominal tube with 7/8 inch outer diameter. All three connections use cup-style sweat joints and the body is made from wrot copper.

Verify tube sizes and joint method before ordering

Confirm that your existing copper lines match the 1/2 inch and 3/4 inch nominal sizes listed for each outlet. The fitting requires sweat soldering so ensure you have the correct flux, solder and torch for copper cup connections. Check local plumbing codes for any restrictions on wrot copper fittings in potable water applications.

Wrot copper handles continuous potable water flow

The material resists corrosion during sustained contact with treated water supplies. Sweat joints remain sealed under constant pressure without the thermal cycling stress that affects threaded or compression alternatives. No moving parts or seals degrade over long service periods in typical residential or commercial plumbing runs.

Highlights

  • Connects three pipe sizes with one wrot-copper reducing tee
  • Sweat-joint cups on all three outlets for leak-free soldering
  • Wrot copper construction resists corrosion in potable-water systems
  • Reduces from 3/4 in to dual 1/2 in branches for flexible layouts
  • Lead-free copper alloy approved for drinking-water installations

Specifications

TypeDrain Components
BrandNibco
ModelC611BH 1/2x1/2x3/4

Questions about this item

Does the NIBCO C611BH reducing tee come with flux or solder, or do I need to buy them separately?

The tee is a sweat fitting made of wrot copper with three cup connections sized 1/2 in, 1/2 in and 3/4 in nominal tube size. Flux and solder are not included and must be purchased separately.

The listing shows a 1/2 x 1/2 x 3/4 configuration — which outlet is the 3/4 inch leg?

The reducing tee has two 1/2 in copper tube size cup ends and one 3/4 in copper tube size cup end, corresponding to the 5/8 in, 5/8 in and 7/8 in outer diameters respectively.

Will this tee handle standard household water pressure once it is soldered into a potable water line?

The fitting is designed for potable water applications and, when properly soldered, provides a permanent joint rated for typical residential plumbing pressures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.