We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 90-degree close rough elbow, 1-inch tube size, wrot copper finish

Nibco, Inc.

Nibco, Inc. C6072 1" Copper 90° Close Rough Elbow Trap

SKU CH-SQDV-WJBJZ MPN C6072

A wrot-copper 90-degree close-rough elbow with FTG x C connections for 1-inch tube, rated to 494 psi at 100 °F and meeting ASME/ANSI B16.22

  • TypeDrain Components
  • 90° close-rough elbow directs flow in tight spaces
  • Wrought copper construction resists corrosion for long service life
  • FTG × C sweat connection fits 1 in tube without adapters
  • Rated 494 psi at 100 °F for high-pressure systems
  • Meets ASME B 16.22 standard for code-compliant installations

Nibco 1" Copper 90° Elbow

The Nibco C6072 is a wrought copper 90-degree close rough elbow designed for plumbing drain systems. It connects a 1-inch tube fitting to a copper sweat joint in a compact radius. The fitting meets ASME/ANSI B16.22 standards for material and dimensions. It is supplied new and ready for installation.

Suited for copper drain piping

This elbow suits installers joining 1-inch copper tube to a fitting end in drainage applications. It handles temperatures from -20 to 400 degrees F and pressures up to 494 psi at 100 degrees F. It is not for systems requiring a street elbow with two sweat ends or a long-radius bend. Buyers needing different tube sizes or connection types should select another model.

1-inch FTG x C connection

The single specification that decides fit is the 1-inch nominal tube size with an FTG x C connection configuration. The outside diameter measures 1-1/8 inches to match standard copper tubing. Verify that the piping layout calls for a close rough 90-degree turn with this exact end combination before purchase.

Highlights

  • 90° close-rough elbow directs flow in tight spaces
  • Wrought copper construction resists corrosion for long service life
  • FTG × C sweat connection fits 1 in tube without adapters
  • Rated 494 psi at 100 °F for high-pressure systems
  • Meets ASME B 16.22 standard for code-compliant installations

Specifications

TypeDrain Components
BrandNibco
ModelC6072 1

Questions about this item

What tube size and connection type does this 1-inch copper elbow require for a solder joint?

The elbow uses a 1-inch tube size with an outside diameter of 1-1/8 inches and an FTG x C fitting connection for copper-to-copper soldering.

How should the close-rough 90-degree elbow be oriented during soldering to avoid a flow restriction?

Clean both the fitting cup and tube end, apply flux, insert the tube fully into the cup, then heat the fitting evenly so capillary action draws solder around the entire joint.

What temperature and pressure limits determine when this wrot copper elbow must be replaced?

The fitting is rated for -20 to 400 degrees Fahrenheit and a maximum of 494 psi at 100 degrees Fahrenheit; replace it if system conditions exceed these limits or if corrosion appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.