We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducer fitting with stepped ends for 1 inch to half inch tube connection

Nibco, Inc.

Nibco, Inc. C6002 1x1/2 Copper Reducer Trap

SKU CH-BVA6-SCX7G MPN C6002

Copper reducer fitting joins 1-inch and 1/2-inch tubes with a 494 psi pressure rating at 100°F

  • TypeDrain Components
  • Reduces pipe diameter with wrot copper durability
  • Handles up to 494 psi at 100 degrees F
  • Operates from -20 to 400 degrees F
  • Meets ASME/ANSI B 16.22 standard
  • FTG x C connection fits 1 in x 1/2 in tubes

Copper Reducer Trap

The Nibco C6002 is a wrot copper reducer trap designed for plumbing drain systems. It connects a 1 inch fitting to a 1/2 inch copper tube using an FTG x C connection type. The component meets ASME/ANSI B 16.22 standards for pressure fittings.

Installers needing a 1 to 1/2 inch transition

This reducer suits professionals joining dissimilar copper tube sizes in drain applications. It is not for installers who require a different diameter step-down or a sweat x sweat connection style. The fitting also does not serve systems needing non-copper materials.

Pressure headroom up to 494 psi

The fitting handles a maximum pressure of 494 psi at 100 degrees Fahrenheit. It operates continuously across a temperature range of -20 to 400 degrees Fahrenheit. Outside this thermal window or above the rated pressure, the joint integrity cannot be assured.

Highlights

  • Reduces pipe diameter with wrot copper durability
  • Handles up to 494 psi at 100 degrees F
  • Operates from -20 to 400 degrees F
  • Meets ASME/ANSI B 16.22 standard
  • FTG x C connection fits 1 in x 1/2 in tubes

Specifications

TypeDrain Components
BrandNibco
ModelC6002 1x1/2

Questions about this item

What copper tube sizes must already be in place to connect this 1 in x 1/2 in reducer?

You need one 1 in nominal tube and one 1/2 in nominal tube; the fitting joins a 1-1/8 in outside diameter to a 5/8 in outside diameter.

Will the ASME/ANSI B 16.22 rating let this reducer stay in an older copper system that sees 494 psi at 100 Degrees F?

Yes, the reducer is rated to 494 psi at 100 Degrees F and meets ASME/ANSI B 16.22, so it matches the pressure class of existing compliant copper piping.

After soldering, how can I confirm the joint holds pressure across the full -20 to 400 Degrees F range?

Pressurise the line to the system test pressure and inspect for leaks; the fitting is rated for continuous service from -20 Degrees F up to 400 Degrees F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.