We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducer trap with FTG by C ends, metallic finish

Nibco, Inc.

Nibco, Inc. C6002 1-1/2 x 1-1/4 in FTG x C Copper Reducer Trap

SKU CH-ZAPF-T92ZH MPN C6002

Copper reducer trap joins 1-1/2 inch and 1-1/4 inch tubing with FTG by C connections rated to 408 psi at 100 degrees F

  • TypeDrain Components
  • Reduces pipe size with wrot copper durability
  • FTG x C connection fits existing copper systems
  • Handles 408 psi at 100 degrees F
  • Operates from -20 to 400 degrees F
  • Meets ASME/ANSI B 16.22 standard

Copper Reducer Trap

The Nibco C6002 is a wrot copper reducer trap designed to transition between 1-1/2 inch and 1-1/4 inch nominal tube sizes in plumbing systems. It serves residential and commercial installers who need a durable, code-compliant fitting for drain waste and vent applications. The fitting connects a tube end to a copper tube socket for a secure joint.

FTG x C Connection Type

The single specification that determines compatibility is the FTG x C fitting connection type, which joins a tube end to a copper sweat socket. The reducer handles tube sizes of 1-1/2 in by 1-1/4 in with outside diameters of 1-5/8 in by 1-3/8 in. It meets ASME/ANSI B16.22 standards for wrought copper pressure fittings.

Simple Sweat Installation

Installation requires standard copper sweat soldering tools and flux for a permanent leak-free joint. Clean both the tube end and socket thoroughly before applying flux and heat. Overheating can damage the copper or burn the flux, leading to voids in the solder joint and potential leaks. Ensure the pipe is fully inserted to the stop for correct alignment.

Highlights

  • Reduces pipe size with wrot copper durability
  • FTG x C connection fits existing copper systems
  • Handles 408 psi at 100 degrees F
  • Operates from -20 to 400 degrees F
  • Meets ASME/ANSI B 16.22 standard

Specifications

TypeDrain Components
BrandNibco
ModelC6002 11/2x11/4

Questions about this item

How does the 408 psi rating hold up when the system runs at 100°F?

The reducer is rated for 408 psi at 100°F, so it will maintain that pressure limit under normal hot-water conditions without derating.

What does the ASME/ANSI B 16.22 standard cover for this fitting?

ASME/ANSI B 16.22 governs wrought-copper solder-joint pressure fittings, confirming the reducer meets dimensional and material requirements for plumbing installations.

Will the 1-5/8 in and 1-3/8 in outside diameters fit standard 1-1/2 in and 1-1/4 in copper tube?

Yes, the outside diameters match the nominal tube sizes, allowing a direct sweat connection to 1-1/2 in and 1-1/4 in copper pipe without adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.