We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat cup ends

Nibco, Inc.

Nibco, Inc. 911RR Reducing Tee 2 x 1-1/2 x 1-1/2 Copper DWV

SKU CH-XBBG-CC0BP

A sweat-fitting reducing tee connects 2 in and 1-1/2 in copper tubes for potable water systems

  • Reducing tee connects 2 in, 1-1/2 in and 1-1/2 in copper tubes
  • Sweat cup connections on all three ends for reliable solder joints
  • Wrot copper construction resists corrosion in potable water systems
  • DWV rated for drain, waste and vent applications
  • NIBCO brand quality trusted by plumbing professionals

Copper DWV Reducing Tee

This Nibco copper DWV reducing tee joins three copper tubes in a drain waste and vent system. The sweat connections accept 2 inch, 1-1/2 inch and 1-1/2 inch tube sizes. Wrot copper construction provides corrosion resistance for potable water applications.

Suitable Installations

Plumbers running a branch line from a 2 inch stack to 1-1/2 inch fixture drains can use this tee. Installers needing a straight coupling or a different reduction ratio should select another fitting.

Connection Configuration

The tee presents cup ends on all sides for sweat soldering. Side A fits 2 inch copper tube with a 2 1/8 inch outer diameter. Sides B and C each fit 1-1/2 inch copper tube with a 1 5/8 inch outer diameter.

Highlights

  • Reducing tee connects 2 in, 1-1/2 in and 1-1/2 in copper tubes
  • Sweat cup connections on all three ends for reliable solder joints
  • Wrot copper construction resists corrosion in potable water systems
  • DWV rated for drain, waste and vent applications
  • NIBCO brand quality trusted by plumbing professionals

Specifications

BrandNibco

Questions about this item

How do I confirm the sweat joints are sound after soldering?

Pressurise the potable water line and inspect each cup joint for leaks; a dry test confirms the wrot copper tee is working as intended.

What comes in the box and what must I supply?

The box contains the 911RR reducing tee only; you must provide copper tube, flux, solder and a torch for the sweat connections.

Which fitting matches a 2 in run with 1 1/2 in branches?

The 911RR is the single listed version with cup sizes of 2 in, 1 1/2 in and 1 1/2 in for that exact configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.