We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nibco, Inc.

Nibco, Inc. 9047 1-1/2" MNPT x 1-1/2" SJ Copper Adapter

SKU CH-VD97-9CN90

Connects 1-1/2" male NPT threads to 1-1/2" sweat-joint copper for air or potable water lines

  • Connects male pipe threads to sweat copper joints
  • Rated for air and potable water systems
  • Withstands temperatures up to 400 degrees Fahrenheit
  • Built to ASME B 16.29 and ASTM B75 standards
  • Manufactured under ISO 9001 quality management

What this adapter does

The NIBCO 9047 is a straight sweat fitting adapter made from wrot copper. It joins a 1-1/2 inch MNPT threaded connection to a 1-1/2 inch SJ copper tube connection for air or potable water lines.

Pressure and temperature limits

The adapter is rated for a maximum operating pressure of 5 psi and a maximum operating temperature of 400 degrees F. It meets ASME B 16.29 and ASTM B75 standards under an ISO 9001 quality system.

Check your pipe and thread type

Verify that your system uses 1-1/2 inch nominal copper tube with an SJ sweat end and a matching 1-1/2 inch MNPT male thread. Confirm the 5 psi pressure ceiling suits the application before ordering.

Highlights

  • Connects male pipe threads to sweat copper joints
  • Rated for air and potable water systems
  • Withstands temperatures up to 400 degrees Fahrenheit
  • Built to ASME B 16.29 and ASTM B75 standards
  • Manufactured under ISO 9001 quality management

Specifications

BrandNIBCO

Questions about this item

Should I choose the sweat-joint or the male-threaded end for my 1-1/2" copper line?

The adapter has one male NPT thread and one sweat joint, both sized for 1-1/2" copper tube, so it connects a threaded fitting to a soldered joint in a single piece.

What does the 5 psi pressure rating mean when the adapter is installed?

The assembly is rated for a maximum operating pressure of 5 psi, limiting it to low-pressure air or water lines.

Which standard governs the threads and what does it cap in practice?

ASME B16.29 defines the wrought-copper fitting dimensions, ensuring the male NPT threads and sweat joint match 1-1/2" copper tube specifications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.