We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat cup ends, shiny metallic finish

Nibco, Inc.

Nibco, Inc. 611RR Reducing Tee 2 x 1/2 x 2 in

SKU CH-KMX3-E3S8J

Copper reducing tee connects 2 in, 1/2 in and 2 in sweat lines for potable water

  • Reducing tee joins 2 in, 1/2 in and 2 in copper tubes
  • Wrot copper construction resists corrosion in potable water systems
  • Sweat cup connections on all three ends for soldered joints
  • Model 611RR identifies this specific reducing tee configuration
  • Suitable for potable water supply installations

Nibco 611RR Reducing Tee for Copper Pipe

This Nibco 611RR reducing tee connects three copper tubes using sweat joints. The fitting is made from wrought copper and is intended for potable water systems. It has a 2 in copper tube size on the run and a 1/2 in copper tube size on the branch.

Suited for reducing a 2 in line to a 1/2 in branch

Plumbers reducing a 2 in copper main to a 1/2 in outlet will find this tee matches the required sizes. Installers who need a different branch size or a threaded connection should look at other fittings.

Reducing tee with 2 in run and 1/2 in branch

The single specification that decides fit is the combination of a 2 in run and a 1/2 in branch in a sweat copper tee. Confirm both tube sizes match your design before purchase.

Highlights

  • Reducing tee joins 2 in, 1/2 in and 2 in copper tubes
  • Wrot copper construction resists corrosion in potable water systems
  • Sweat cup connections on all three ends for soldered joints
  • Model 611RR identifies this specific reducing tee configuration
  • Suitable for potable water supply installations

Specifications

BrandNibco

Questions about this item

Will the wrot copper reducing tee need replacement due to corrosion in potable water systems?

Wrot copper resists corrosion in potable water, so the tee typically lasts the life of the plumbing without scheduled replacement.

What limits flow through the 1/2 inch branch under sustained demand?

The smaller 1/2 inch copper tube size on the branch side restricts maximum flow compared to the 2 inch run connections.

Does the copper tee add heat or noise when water runs continuously?

Copper conducts heat from hot water but the tee itself generates no noise and draws no power during operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.