We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat cup connections in a T shape

Nibco, Inc.

Nibco, Inc. 611RR Copper Reducing Tee 1-1/2 x 3/4 x 3/4 in

SKU CH-0093-QRCA5

Sweat-fitting copper reducing tee connects 1-1/2 in, 3/4 in and 3/4 in tubes for potable water systems

  • Reducing tee joins three copper lines
  • Wrot copper resists corrosion in potable water
  • Sweat connections create leak-free joints
  • 1-1/2 inch run splits to dual 3/4 branches
  • Lead-free alloy meets drinking-water standards

Copper Reducing Tee 1-1/2 x 3/4

This wrot copper reducing tee connects a 1-1/2 inch copper tube to two 3/4 inch branches for potable water systems. It suits plumbers and DIY installers who need a sweat fitting with cup connections on all three sides. The specific fitting shape allows a smooth transition between different tube diameters.

Sweat Installation and Common Issues

Sweat the cup ends onto clean, fluxed copper tube using a propane or MAPP torch and lead-free solder. Ensure each joint reaches full temperature before applying solder so the alloy flows by capillary action. Overheating can anneal the copper and weaken the tube, while insufficient heat leaves voids that leak under pressure.

Check Tube Sizes and Local Codes

Verify that your existing tubing matches the 1-5/8 inch outer diameter on the run and 7/8 inch on both branches before ordering. Confirm that local plumbing codes permit copper sweat fittings for potable water in your jurisdiction. The item ships directly from the supplier and orders of 75 or more qualify for free shipping.

Highlights

  • Reducing tee joins three copper lines
  • Wrot copper resists corrosion in potable water
  • Sweat connections create leak-free joints
  • 1-1/2 inch run splits to dual 3/4 branches
  • Lead-free alloy meets drinking-water standards

Specifications

BrandNibco

Questions about this item

How do I confirm the 611RR reducing tee is sealed correctly after soldering?

Pressurise the potable water line and inspect each cup joint for leaks; a dry, tight sweat connection on the 1 5/8 in and 7/8 in tube ends shows it is working.

What comes with the fitting and what must I supply?

The box contains the wrot copper reducing tee only; you must provide copper tube, flux, solder and a torch for the sweat connections.

Which 611RR size combination suits a 1 1/2 in main with two 3/4 in branches?

This model is the 1 1/2 x 3/4 x 3/4 in reducing tee, matching that exact run and outlet requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.