We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat ends in a T shape

Nibco, Inc.

Nibco, Inc. 611RR 2 x 1-1/2 x 3/4 Copper Reducing Tee

SKU CH-NF6E-3HJP6

Connects 2 in, 1-1/2 in, and 3/4 in copper tubes in potable water systems using sweat connections

  • Reduces three pipe sizes in one fitting
  • Sweat connections create permanent leak-free joints
  • Wrot copper construction resists corrosion in potable water
  • Lead-free material meets drinking-water safety standards
  • Compact reducing tee simplifies branch-line installations

Copper Reducing Tee for Potable Water

This NIBCO 611RR fitting joins three copper tubes in a reducing tee configuration. It is designed for sweat connections on potable water lines. The three cup ends accept nominal tube sizes of two inches, one and one-half inches, and three-quarters of an inch.

Three Branch Sizes in One Fitting

The run accommodates a two inch copper tube with a two and one-eighth inch outer diameter. One branch steps down to a one and one-half inch tube with a one and five-eighths inch outer diameter. The third branch reduces further to a three-quarter inch tube with a seven-eighths inch outer diameter. Wrot copper construction handles standard residential pressure and temperature ranges.

Replaces Separate Reducers and Tees

Using this single fitting eliminates the need to assemble a tee with additional reducer couplings. The jump is worthwhile when a installer wants fewer solder joints and a cleaner layout on a supply manifold. It is not suited for systems that require threaded or press-fit connections.

Highlights

  • Reduces three pipe sizes in one fitting
  • Sweat connections create permanent leak-free joints
  • Wrot copper construction resists corrosion in potable water
  • Lead-free material meets drinking-water safety standards
  • Compact reducing tee simplifies branch-line installations

Specifications

BrandNibco

Questions about this item

Will the 2-inch sweat end of this reducing tee fit onto my existing 2-inch copper pipe?

Yes, the 2-inch side has a tube outer diameter of 2 1/8 inches, matching standard 2-inch copper tubing for sweat soldering.

How can I confirm the joints are sound after soldering the three connections?

Pressurise the system and inspect each sweat joint for leaks; a properly soldered cup fitting shows a continuous fillet of solder around the full circumference.

Does the box include flux, solder or any installation tools?

No, only the wrot copper reducing tee is supplied; flux, lead-free solder and a propane torch must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.