We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three socket ends, two larger and one smaller

Nibco, Inc.

Nibco, Inc. 611R reducing tee trap 2-1/2x2-1/2x2 in

SKU CH-MXK7-PX2KS MPN 611R

Reducing tee connects three copper tubes at 2-1/2, 2-1/2 and 2 inches, rated to 336 psi at 100°F

  • TypeDrain Components
  • MaterialHAWA
  • Reduces pipe diameter from 2-1/2 to 2 inches for versatile plumbing layouts
  • Wrot copper construction resists corrosion and handles temperatures from -20 to 400 °F
  • Rated 336 psi at 100 °F for reliable high-pressure performance
  • Meets ASME/ANSI B16.22 standard ensuring code-compliant installations
  • C x C x C sweat connections simplify joining without threading or flanges

Reducing tee for copper plumbing

This wrot copper reducing tee joins three tube ends in a C x C x C configuration with dimensions of 2-1/2 in by 2-1/2 in by 2 in. It is rated for a maximum pressure of 336 psi at 100 degrees F and operates across a temperature range of -20 to 400 degrees F. The fitting meets ASME/ANSI B 16.22 standards for solder-joint pressure fittings.

Installers needing a stepped branch connection

Suits plumbers and HVAC technicians who require a durable copper transition between differing tube sizes in a single fitting. Not for systems that exceed the stated pressure or temperature limits. Not for applications requiring threaded, flanged or press-fit connections instead of solder-joint ends.

2-1/2 x 2-1/2 x 2 in solder-joint sizing

The three tube diameters determine whether this tee matches the pipe run and branch you are assembling. Verify that your copper tubing outside diameters correspond to 2-5/8 in, 2-5/8 in and 2-1/8 in respectively. A mismatch in any of the three dimensions means the fitting will not seal correctly.

Highlights

  • Reduces pipe diameter from 2-1/2 to 2 inches for versatile plumbing layouts
  • Wrot copper construction resists corrosion and handles temperatures from -20 to 400 °F
  • Rated 336 psi at 100 °F for reliable high-pressure performance
  • Meets ASME/ANSI B16.22 standard ensuring code-compliant installations
  • C x C x C sweat connections simplify joining without threading or flanges

Specifications

TypeDrain Components
MaterialHAWA
BrandNibco
Model611R 21/2x21/2x2

Questions about this item

What copper tubing sizes must I already have to solder this 2-1/2 in x 2-1/2 in x 2 in reducing tee?

You need straight lengths of 2-1/2 inch and 2 inch copper tube with 2-5/8 in and 2-1/8 in outside diameters respectively for the C x C x C sweat connections.

Will the 336 psi rating at 100 Degrees F hold if I keep older copper pipe rated to a lower pressure?

The system pressure is limited by the lowest-rated component, so older pipe with a lower pressure class will dictate the maximum safe working pressure.

How can I verify the joint is sound after soldering the three outlets?

Pressurise the line up to 336 psi at 100 Degrees F and inspect each sweat joint for leaks; no weeping confirms a proper bond.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.