We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat cup ends in a T shape

Nibco, Inc.

Nibco, Inc. 611R Reducing Tee 1-1/2 x 1-1/2 x 1-1/4 in

SKU CH-METM-DMVEB

Copper reducing tee joins two 1-1/2 inch lines to a 1-1/4 inch branch for potable water systems

  • Reduces flow from 1-1/2 in to 1-1/4 in with wrot copper construction
  • Sweat cup connections on all three ends for secure solder joints
  • Wrot copper material resists corrosion in potable water systems
  • Fits 1-5/8 in OD tube on run and 1-3/8 in OD on branch
  • Model 611R reducing tee designed for copper plumbing installations

Copper Reducing Tee

This Nibco 611R copper reducing tee joins three sweat connections in a tee configuration. Two outlets accept 1-1/2 inch nominal copper tube while the third reduces to 1-1/4 inch. The wrought copper body is intended for potable water systems. All three ends are cup type for standard solder installation.

For plumbers reducing a main line

The fitting suits installers who need to drop from a 1-1/2 inch trunk to a 1-1/4 inch branch while keeping a straight 1-1/2 inch run. It is not for systems that require threaded or press connections. Buyers who need equal outlets on all three ports should select a straight tee instead.

1-1/2 x 1-1/2 x 1-1/4 nominal sizing

The critical specification is the combination of nominal copper tube sizes: two ends at 1-1/2 inch and one at 1-1/4 inch. Matching these dimensions to the pipe being joined determines whether this reducing tee is the correct part for the job.

Highlights

  • Reduces flow from 1-1/2 in to 1-1/4 in with wrot copper construction
  • Sweat cup connections on all three ends for secure solder joints
  • Wrot copper material resists corrosion in potable water systems
  • Fits 1-5/8 in OD tube on run and 1-3/8 in OD on branch
  • Model 611R reducing tee designed for copper plumbing installations

Specifications

BrandNibco

Questions about this item

What copper tube sizes must I already have to connect all three ends of the 611R reducing tee?

The tee accepts 1-1/2 in copper tube on two ends and 1-1/4 in copper tube on the third end, each with a cup sweat connection.

Can I join the 1-1/4 in branch of this tee to an existing 1-1/4 in copper line without changing the joint method?

Yes, the branch uses the same cup sweat connection as the larger ends, so it matches standard 1-1/4 in copper tubing joints.

How can I verify the 611R tee is correctly installed after sweating the joints?

Pressurise the potable-water system and inspect each cup joint for leaks; a dry, sealed joint on all three connections confirms proper installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.