We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat cup connections, two larger and one smaller, shiny metallic finish

Nibco, Inc.

Nibco, Inc. 611R Copper Reducing Tee coupling

SKU CH-VVFV-SN4ZW

A copper reducing tee connects 5/8 in and 3/8 in copper tubing for potable water systems

  • Reduces copper pipe from 5/8 in to 3/8 in with sweat connections
  • Wrot copper construction resists corrosion in potable water systems
  • Three cup ends accept standard copper tube for leak-free joints
  • Lead-free alloy meets safe drinking water standards
  • Compact reducing tee design simplifies branch line installations

Copper Reducing Tee for Potable Water

The NIBCO 611R is a sweat fitting tee designed for potable water systems. It connects three copper tubes using cup connections on all sides. The run accepts two 5/8 inch copper tube sizes while the branch reduces to 3/8 inch.

Sweat Connections Require Soldering

Each cup connection is sized for the tube outer diameter: 3/4 inch on the two run ends and 1/2 inch on the branch. Installers must clean, flux and solder the joints to create a permanent, leak-free seal. No mechanical fasteners or push-fit components are included.

Reducing Branch Limits Flow Capacity

The 3/8 inch branch provides a smaller flow path than the 5/8 inch run, making it suitable for fixture take-offs or secondary lines. It does not suit applications needing equal flow on all three outlets or larger branch connections.

Highlights

  • Reduces copper pipe from 5/8 in to 3/8 in with sweat connections
  • Wrot copper construction resists corrosion in potable water systems
  • Three cup ends accept standard copper tube for leak-free joints
  • Lead-free alloy meets safe drinking water standards
  • Compact reducing tee design simplifies branch line installations

Specifications

BrandNIBCO

Questions about this item

Does the wrot copper tee require any flux replacement or internal cleaning after years of potable water service?

Wrot copper fittings are permanent sweat connections; no internal components need replacement or periodic cleaning once the joint is properly soldered.

What pressure or temperature limit will be reached first if the tee runs continuously in a hot water loop?

The copper material itself handles typical domestic hot water pressures and temperatures; the practical limit is the solder joint rating, not the tee body.

Will the tee transmit noticeable heat or noise when hot water flows through it all day?

Copper conducts heat efficiently so the tee will become warm to the touch, but it adds no mechanical noise beyond normal water flow sound.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.