We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper bullhead tee with three sweat cup ends, reddish metallic finish

Nibco, Inc.

Nibco, Inc. 611BH Copper Bullhead Tee 1-1/4" x 1-1/4" x 1-1/2

SKU CH-AQXY-R5TZV

Copper bullhead tee joins two 1-1/4 in branches to a 1-1/2 in run for potable water sweat connections

  • Sweat connection enables leak-free solder joints
  • Bullhead tee splits flow from 1-1/4" to 1-1/2" run
  • Wrot copper construction resists corrosion in potable water
  • All three ends accept copper tube for uniform installation
  • Adapter tee shape simplifies transitions between different tube sizes

NIBCO 611BH Copper Bullhead Tee

This NIBCO 611BH copper bullhead tee connects three sweat-fitting ends for potable water lines. The branch outlet steps up to a larger tube size than the two run outlets. Wrought copper construction provides corrosion resistance for long service life in residential or commercial plumbing systems. It ships new and ready for installation.

Verify tube sizes and connection method before

Confirm that your existing copper tubing matches the 1 3/8 in outer diameter on the two run ends and the 1 5/8 in outer diameter on the branch end. Ensure your system uses sweat (solder) connections rather than press, push-fit or threaded joints. The fitting is approved for potable water applications only.

Fits into a soldered copper distribution network

The tee joins two 1-1/4 in nominal copper tubes and one 1-1/2 in nominal tube in a single junction, reducing the number of separate couplings required. It needs flux, lead-free solder and a torch to make permanent leak-free joints. No additional adapters are required when the surrounding tubing matches the listed diameters.

Highlights

  • Sweat connection enables leak-free solder joints
  • Bullhead tee splits flow from 1-1/4" to 1-1/2" run
  • Wrot copper construction resists corrosion in potable water
  • All three ends accept copper tube for uniform installation
  • Adapter tee shape simplifies transitions between different tube sizes

Specifications

BrandNIBCO

Questions about this item

Does the 611BH bullhead tee ship with solder or flux, or must I buy them separately?

The fitting is supplied alone; solder and flux are not included and must be purchased separately for the sweat connections.

The tee has two 1-1/4 in ends and one 1-1/2 in end — which end should I use for the main supply line?

The 1-1/2 in cup (Side C) is the larger run; use it for the main supply and the two 1-1/4 in cups for the branches.

What does the wrot copper construction mean for potable-water installations?

Wrot copper is approved for potable water, so the tee can be used directly in drinking-water lines after proper soldering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.