We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper bullhead tee fitting with three sweat connections

Nibco, Inc.

Nibco, Inc. 611BH Copper Bullhead Tee

SKU CH-GS2R-25V6Y

Connects two 1-1/2" and one 2" copper lines in a sweat-fitting tee for potable water systems

  • Sweat-ready copper tee simplifies potable-water installations
  • Wrot copper construction resists corrosion for long service life
  • Bullhead design joins 1-1/2 in, 1-1/2 in and 2 in copper tubes
  • Cup connections on all three ends enable secure sweat joints
  • Model 611BH from NIBCO ensures consistent quality and fit

Copper Bullhead Tee for Potable Water

This wrought copper sweat fitting joins three copper tubes in a tee configuration. It accepts 1-1/2 inch tube on two ports and 2 inch tube on the third port. The fitting is intended for potable water systems and is supplied new. Builders who need a reducing tee with different size combinations or press-fit connections cannot use this part.

Thermal Performance and Installation Heat

The copper body conducts heat rapidly during soldering, so even heating around each cup is required for a sound joint. No thermal rating, pressure rating or noise data is provided by the manufacturer. Installers who need documented pressure-temperature curves or listed pressure classes must consult the applicable code or specification separately.

Included Components and Compliance

The package contains only the bullhead tee itself; no flux, solder, cleaning abrasives or insulation are bundled. The item is not restricted from sale in any listed state. Projects that require kits with companion fittings or pre-applied sealant will need those items sourced separately.

Highlights

  • Sweat-ready copper tee simplifies potable-water installations
  • Wrot copper construction resists corrosion for long service life
  • Bullhead design joins 1-1/2 in, 1-1/2 in and 2 in copper tubes
  • Cup connections on all three ends enable secure sweat joints
  • Model 611BH from NIBCO ensures consistent quality and fit

Specifications

BrandNIBCO

Questions about this item

How do I sweat the 1-1/2" and 2" copper ends without leaks?

Clean each tube end and the cup interiors with emery cloth, apply flux evenly, insert tubes fully into the 1-5/8" and 2-1/8" cups, then heat the fitting body evenly until solder flows into all three joints.

What upkeep does a wrot copper bullhead tee need after installation?

None under normal potable-water service; inspect joints visually during any system work and replace only if corrosion or mechanical damage appears.

What pressure or temperature limit will I hit first on a hot-water recirculation loop?

The copper material handles typical residential hot-water temperatures and pressures well beyond code minimums; the practical limit is the solder joint rating, not the tee itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.