We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 90-degree close rough elbow, 1 inch, rough finish

Nibco, Inc.

Nibco, Inc. 60722 Copper 90 Degree Close Rough Elbow 1 in

SKU CH-JKEN-RMN7P

A 1-inch sweat copper elbow redirects pipe 90 degrees for air, gases or potable water at up to 395 psi and 400 degrees F

  • 90-degree close rough elbow redirects copper pipe runs efficiently
  • Sweat fitting design joins 1 in copper tube securely
  • Wrot copper construction resists corrosion in potable water systems
  • Rated for 395 psi at 200 °F for demanding pressure applications
  • Withstands temperatures up to 400 °F for hot water and gas lines

Copper 90° Close Rough Elbow

This 1 in copper fitting joins two tubes of the same diameter at a right angle. It is designed for sweat connections on both ends using wrot copper material. The elbow handles air, gases and potable water in residential and commercial plumbing systems. It is a new component ready for installation.

Sweat Connection Requirements

Both ends use a 1 in nominal tube size with a 1 1/8 in outer diameter for standard sweat joining. The close rough pattern keeps the centre-to-end distance short for tight routing. No threading or mechanical joints are needed, freeing up space where a union or adapter would otherwise add length. The fitting withstands 395 psi at 200 °F and temperatures up to 400 °F.

For Standard Copper Plumbing Runs

This elbow suits installers joining two 1 in copper tubes in a 90° turn where a compact radius is required. It is not intended for threaded, press or push-fit systems. Builders needing a long-radius bend, a reducing elbow or a different tube size should select another fitting.

Highlights

  • 90-degree close rough elbow redirects copper pipe runs efficiently
  • Sweat fitting design joins 1 in copper tube securely
  • Wrot copper construction resists corrosion in potable water systems
  • Rated for 395 psi at 200 °F for demanding pressure applications
  • Withstands temperatures up to 400 °F for hot water and gas lines

Specifications

BrandNIBCO

Questions about this item

At what pressure and temperature does the 90-degree close rough elbow reach its maximum operating limit?

The fitting is rated for a maximum operating pressure of 395 psi at 200 degrees Fahrenheit, with an overall maximum temperature of 400 degrees Fahrenheit.

Will the copper elbow generate noise or excess heat when used continuously in a potable water line?

As a passive copper sweat fitting with no moving parts, it produces no operational noise or self-generated heat during all-day service.

What pipe size and tools are required to install this 1-inch nominal elbow?

It accepts 1-inch nominal copper tube with a 1 1/8-inch outer diameter on both ends and requires a torch, flux, and solder for sweat installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.