We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 90-degree elbow trap fitting 3 inch tube size

Nibco, Inc.

Nibco, Inc. 6072 3 in 90 Degree Elbow Trap

SKU CH-SKV3-HVBFQ MPN 6072

A copper 90-degree elbow fitting connects 3-inch tubes with an FTG x C joint rated for 317 psi at 100°F

  • TypeDrain Components
  • MaterialHAWA
  • 90-degree elbow directs flow in tight spaces
  • Wrot copper construction resists corrosion across wide temperature range
  • FTG x C connection fits 3-inch tube without adapters
  • Rated 317 psi at 100 °F per ASME B16.22

3-inch Copper 90-Degree Elbow for Drain Systems

This Nibco 6072 fitting connects a 3-inch tube to a copper drain line using a wrot copper FTG x C joint. The elbow redirects flow at a 90-degree angle within drainage installations. It meets ASME/ANSI B 16.22 standards for material and dimensions. The component is supplied new for residential or commercial plumbing work.

Verify tube size and pressure rating before ordering

Confirm your system uses a 3-inch nominal tube with an outside diameter of 3-1/8 inches for a proper fit. The fitting handles a maximum pressure of 317 psi at 100 degrees Fahrenheit. Operating temperatures must stay between -20 and 400 degrees Fahrenheit. Ensure the FTG x C connection type matches your existing copper piping.

Highlights

  • 90-degree elbow directs flow in tight spaces
  • Wrot copper construction resists corrosion across wide temperature range
  • FTG x C connection fits 3-inch tube without adapters
  • Rated 317 psi at 100 °F per ASME B16.22

Specifications

TypeDrain Components
MaterialHAWA
BrandNibco
Model6072 3

Questions about this item

What comes in the box and do I need to buy solder or flux separately?

The box contains the 90-degree copper elbow fitting only. Solder, flux and any required pipe are sold separately.

Which size should I choose for a 3-inch copper tube installation?

This model fits 3-inch nominal tube with a 3-1/8 inch outside diameter and is rated for 317 psi at 100°F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.