We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 45-degree elbow fitting with sweat connections, wrot copper finish

Nibco, Inc.

Nibco, Inc. 6062 45 Degree Copper Trap

SKU CH-XCSF-Y2X0X MPN 6062

A 45-degree copper elbow joins 3-inch tubes for air, gas or potable water at up to 317 psi and 400 °F

  • TypeDrain Components
  • MaterialHAWA
  • Handles up to 317 psi at 100 °F for reliable pressure containment
  • Operates continuously up to 400 °F for high-temperature plumbing systems
  • Wrot copper construction resists corrosion in potable water, air and gas lines
  • 45-degree elbow profile routes pipe runs efficiently around obstacles
  • FTG by cup sweat connections enable secure, leak-free joints

Copper 45° Elbow for Plumbing Systems

The Nibco 6062 is a wrot-copper sweat fitting that joins two 3-inch nominal copper tubes at a forty-five-degree angle. It serves plumbers and HVAC technicians who need a smooth directional change in potable-water, air or gas lines. The fitting accepts standard copper tube with a 3-1/8-inch outside diameter on both ends.

Sweat Connection Simplifies Installation

Each end is sized for direct soldering to copper tube without adapters or threaded joints. The FTG-by-cup configuration lets the installer slip the tube into the cup side and solder the spigot side into a matching fitting, reducing the number of joints and potential leak paths in the finished system.

Pressure and Temperature Limits Define Safe Use

The elbow is rated for 317 psi at 100 degrees Fahrenheit and a maximum operating temperature of 400 degrees Fahrenheit. Systems that exceed either limit require a different fitting material or pressure class, so designers must verify service conditions before specifying this component.

Highlights

  • Handles up to 317 psi at 100 °F for reliable pressure containment
  • Operates continuously up to 400 °F for high-temperature plumbing systems
  • Wrot copper construction resists corrosion in potable water, air and gas lines
  • 45-degree elbow profile routes pipe runs efficiently around obstacles
  • FTG by cup sweat connections enable secure, leak-free joints

Specifications

TypeDrain Components
MaterialHAWA
BrandNibco
Model6062 3

Questions about this item

How often will the wrot copper elbow need replacement in a potable water system?

Wrot copper resists corrosion in potable water, so the elbow typically lasts the life of the piping without scheduled replacement.

What pressure limit applies first during continuous operation at elevated temperature?

The 317 psi rating at 100 °F governs; pressure capacity decreases as temperature rises toward the 400 °F maximum.

Does the fitting generate noise or heat when water flows through it all day?

The passive copper elbow adds no mechanical noise or heat; fluid temperature and velocity determine any audible flow sound.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.