We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper drain trap adapter with threaded and solder connections

Nibco, Inc.

Nibco, Inc. 604 Drain Trap, 1 in C x MNPT, 494 psi

SKU CH-HGHR-B490S MPN 604

Copper adapter connects 1 in tube to 1 in male NPT threads, rated 494 psi at 100 °F with a -20 to 400 °F range

  • TypeDrain Components
  • Wrot copper construction resists corrosion
  • 494 psi rating at 100°F handles high-pressure lines
  • Operates from -20°F to 400°F for wide temperature range
  • ASME/ANSI B16.22 compliance ensures code-approved installation
  • 1 in C x MNPT connects copper tube to male pipe thread

Copper Drain Adapter 1 in C x MNPT

The Nibco 604 is a wrot copper adapter designed for drain systems. It connects a 1 inch copper tube to a 1 inch male NPT thread. The fitting meets ASME/ANSI B 16.22 standards for plumbing installations.

For copper drain connections only

This adapter suits installers joining copper tube to threaded pipe in drain applications. It is not for press-fit, push-fit or compression-only systems. Buyers needing a different connection type or material should look at other fittings.

Rated 494 psi at 100 Degrees F

The maximum working pressure is 494 psi at 100 Degrees F. The temperature range spans -20 Degrees to 400 Degrees F. This pressure rating determines whether the part matches the system design requirements.

Highlights

  • Wrot copper construction resists corrosion
  • 494 psi rating at 100°F handles high-pressure lines
  • Operates from -20°F to 400°F for wide temperature range
  • ASME/ANSI B16.22 compliance ensures code-approved installation
  • 1 in C x MNPT connects copper tube to male pipe thread

Specifications

TypeDrain Components
BrandNibco
Model604 1

Questions about this item

What size copper tube and male pipe thread does the 1 in C x MNPT fitting connect?

The wrot-copper adapter joins a 1 in copper tube to a 1 in MNPT pipe thread.

How do you make the copper-to-thread joint without leaks?

Clean the tube end, apply flux, slide the C end on, sweat-solder it, then thread the MNPT end into the female fitting with pipe sealant.

When should the trap be replaced given its pressure and temperature limits?

Replace it if corrosion, cracking or leakage appears after prolonged exposure near the 494 psi at 100 °F or the 400 °F upper temperature limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.