We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper pipe adapter with threaded male end

Nibco, Inc.

Nibco, Inc. 604 1-1/2" C x MNPT Copper Adapter

SKU CH-DVFC-39520 MPN 604

Connects 1-1/2 inch copper tubing to male NPT threads, rated to 408 psi at 100°F with a -20 to 400°F range per ASME B16.22

  • TypeDrain Components
  • Wrot copper construction resists corrosion for long service life
  • 408 psi rating at 100°F handles high-pressure systems
  • 20°F to 400°F range suits extreme temperature conditions
  • ASME/ANSI B16.22 compliance ensures reliable code-approved installations
  • C x MNPT connection joins 1-1/2 in tube to male pipe threads

Copper Adapter for 1-1/2" Tube

The Nibco 604 adapter joins 1-1/2 inch copper tube to a 1-1/2 inch male NPT thread using a wrot copper body rated for hydronic and drainage service. It suits installers who need a permanent sweat-to-thread transition on 1-1/2 inch lines.

Check Tube Size and Thread Standard

Verify that the existing copper tube measures 1-1/2 inch nominal so the sweat end fits correctly. Confirm the mating component uses a 1-1/2 inch male NPT thread and that the system design accommodates a soldered joint rather than a press or compression connection.

Pressure and Temperature Limits

The fitting withstands 408 psi at 100 degrees F and operates continuously from -20 degrees to 400 degrees F. Wrot copper construction resists scaling and corrosion in closed-loop hydronic systems without adding mechanical noise or vibration.

Highlights

  • Wrot copper construction resists corrosion for long service life
  • 408 psi rating at 100°F handles high-pressure systems
  • 20°F to 400°F range suits extreme temperature conditions
  • ASME/ANSI B16.22 compliance ensures reliable code-approved installations
  • C x MNPT connection joins 1-1/2 in tube to male pipe threads

Specifications

TypeDrain Components
BrandNibco
Model604 1 1/2

Questions about this item

Does the Nibco 604 copper adapter include solder or flux in the box?

The package contains only the wrought copper adapter; solder, flux and any pipe sealant must be purchased separately.

Should I choose a different model if my system runs hotter than 400 Degrees F?

The adapter is rated to 400 Degrees F maximum, so a higher-temperature fitting would be required for hotter service.

What does the 408 psi rating at 100 Degrees F mean for everyday plumbing pressure?

It indicates the fitting can safely handle 408 psi at 100 Degrees F, well above typical residential supply pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.