We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight copper adapter with male sweat and female threaded ends

Nibco, Inc.

Nibco, Inc. 6032 Straight Adapter Copper FTG 2 in FNPT 2 in

SKU CH-0SPZ-270BA

A 2-inch copper straight adapter connects FTG and FNPT ends for air, gases and potable water up to 291 psi at 200 °F

  • Sweat adapter connects copper tube to FNPT threads
  • Rated 291 psi at 200 °F for demanding lines
  • Withstands 400 °F continuous service temperature
  • Wrot copper construction resists corrosion in potable water
  • Straight 2 in copper FTG to 2 in FNPT shape

Copper straight adapter for 2-inch systems

The NIBCO 6032 is a sweat fitting adapter made from wrot copper. It joins a 2-inch copper tube to a 2-inch FNPT threaded connection. The straight shape suits in-line installations for air, gases or potable water. It is a new component supplied by NIBCO.

Wrot copper construction handles pressure and heat

The adapter is rated for a maximum operating pressure of 291 psi at 200 degrees F and a maximum operating temperature of 400 degrees F. The FTG side accepts a 2 1/8 inch tube outer diameter while the FNPT side matches 2-inch pipe threads. These limits define the safe envelope for daily service.

No extra parts or software included

The product ships as a single fitting with no bundled accessories or configuration tools. Orders valued at 75 or more qualify for free shipping from the supplier. Buyers who need additional couplings, reducers or thread sealant must source them separately.

Highlights

  • Sweat adapter connects copper tube to FNPT threads
  • Rated 291 psi at 200 °F for demanding lines
  • Withstands 400 °F continuous service temperature
  • Wrot copper construction resists corrosion in potable water
  • Straight 2 in copper FTG to 2 in FNPT shape

Specifications

BrandNIBCO

Questions about this item

What maximum operating pressure does the NIBCO 6032 straight adapter handle at 200 °F?

The adapter is rated for 291 psi at 200 °F, which is the practical pressure ceiling for hot-water or steam lines at that temperature.

What copper tube size and outer diameter does the fitting end require for sweat soldering?

Side A takes a 2 in copper tube with a 2 1/8 in outer diameter, so the tubing must match those dimensions before soldering.

How is the NIBCO 6032 installed, and what step is most often missed?

Clean and flux the 2 in copper tube, sweat-solder it into the FTG end, then thread the FNPT side with pipe sealant; the step most often missed is applying flux evenly before heating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.