We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper straight reducing coupling 2 1/2 by 1 inch

Nibco, Inc.

Nibco, Inc. 6002 Straight Reducing Coupling 2 1/2 in x 1 in

SKU CH-EY7A-DP7G5

Connects 2 1/2 in and 1 in copper tubes for air, gases or potable water systems, rated to 269 psi at 200 Degrees F

  • Straight reducing coupling joins 2 1/2 in to 1 in copper tube
  • Wrot copper construction withstands 269 psi at 200 degrees F
  • Rated for air, gases and potable water systems
  • Sweat connection style enables secure soldered joints
  • Operates up to 400 degrees F maximum temperature

Copper reducing coupling for plumbing systems

This straight reducing coupling joins 2 1/2 inch copper tube to 1 inch copper tube using a sweat connection on the larger end and a cup connection on the smaller end. It is built from wrot copper and suits air, gases and potable water lines in residential and commercial installations.

Rated for 269 psi at 200 Degrees F

The fitting handles typical hot and cold water pressures with ample headroom for standard domestic and light commercial systems. It reaches its pressure limit at elevated temperature, so applications above 200 Degrees F must stay within the 269 psi ceiling to avoid overstressing the joint.

Replaces mismatched copper transitions

Use this coupling when you need a direct, soldered step-down between the two tube sizes without extra fittings. It is not suited for systems that require press, push-fit or flanged connections, or for pipe diameters outside the stated 2 1/2 inch and 1 inch copper tube sizes.

Highlights

  • Straight reducing coupling joins 2 1/2 in to 1 in copper tube
  • Wrot copper construction withstands 269 psi at 200 degrees F
  • Rated for air, gases and potable water systems
  • Sweat connection style enables secure soldered joints
  • Operates up to 400 degrees F maximum temperature

Specifications

BrandNibco

Questions about this item

Will the 2 1/2 in FTG end fit the 2 5/8 in OD copper tube I already have?

Yes, the 2 1/2 in FTG side is made for 2 5/8 in OD copper tube, so your existing pipe matches the fitting.

How can I confirm the joint is sound after sweating it?

Pressurise the line up to 269 psi at 200 °F and check for leaks; the fitting is rated for that pressure and temperature.

Does the box include flux, solder or any sealing compound?

Only the wrot copper reducing coupling is supplied; flux, solder and any thread sealant must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.