We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducer fitting with smooth metallic finish 3 by 2 inches

Nibco, Inc.

Nibco, Inc. 6002 3x2 Copper Reducer Trap

SKU CH-NDTM-Z6APJ MPN 6002

A wrot-copper reducer fitting that connects a 3-inch tube to a 2-inch tube with an FTG-by-C joint, rated to 317 psi at 100 °F and compliant with ASME/ANSI B 16.22

  • TypeDrain Components
  • Copper construction resists corrosion for long service life
  • 3-inch by 2-inch reducer connects different pipe diameters
  • Pressure rated to 317 psi at 100 degrees Fahrenheit
  • Operates from minus 20 to 400 degrees Fahrenheit
  • Meets ASME/ANSI B 16.22 standard

Copper Reducer Trap 3x2 Inch

The NIBCO 6002 is a wrot copper drain component designed to transition between 3 inch and 2 inch nominal tube sizes. It uses an FTG by C connection type with outside diameters of 3-1/8 inch by 2-1/8 inch. The fitting meets ASME/ANSI B16.22 standards for plumbing installations.

Who This Fits And Who It Does Not

Plumbers needing a durable copper reducer for drain waste and vent systems within the rated pressure and temperature range will find this suitable. Installers requiring plastic or threaded connections should select a different fitting type. Projects demanding sizes other than 3 inch by 2 inch cannot use this specific model.

Pressure And Temperature Rating

The reducer handles a maximum pressure of 317 psi at 100 degrees Fahrenheit and operates across a temperature range from -20 to 400 degrees Fahrenheit. These limits determine whether the part matches the system design requirements.

Highlights

  • Copper construction resists corrosion for long service life
  • 3-inch by 2-inch reducer connects different pipe diameters
  • Pressure rated to 317 psi at 100 degrees Fahrenheit
  • Operates from minus 20 to 400 degrees Fahrenheit
  • Meets ASME/ANSI B 16.22 standard

Specifications

TypeDrain Components
BrandNibco
Model6002 3x2

Questions about this item

Will the wrot copper reducer need replacement due to corrosion or wear under normal plumbing conditions?

Wrot copper resists corrosion in typical water systems; the fitting is rated for temperatures from -20 to 400 degrees F and pressures up to 317 psi at 100 degrees F, so it lasts the life of the installation without scheduled replacement.

What pressure limit will be reached first if the system runs continuously at high temperature?

The reducer is rated for a maximum of 317 psi at 100 degrees F; pressure capacity decreases as temperature rises toward the 400 degree F upper limit, so sustained high-temperature operation hits the pressure derating before the temperature ceiling.

Does the copper fitting expand, make noise or add heat to the line during all-day operation?

Copper expands predictably with temperature changes but the rigid wrot construction produces no mechanical noise; the fitting itself adds no heat — it simply conducts the fluid temperature within the -20 to 400 degree F rated range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.