We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducer fitting, FTG by C connection, 2 by 1-1/4 inch nominal size

Nibco, Inc.

Nibco, Inc. 6002 2" x 1-1/4" FTG x C Copper Reducer

SKU CH-JTX3-W0RSA MPN 6002

Connects 2 in. and 1-1/4 in. copper tube with a wrought copper FTG x C fitting rated to 364 psi at 100 °F

  • TypeDrain Components
  • MaterialHAWA
  • Copper construction resists corrosion for long service life
  • FTG x C connection simplifies installation in copper piping systems
  • Reduces 2 in to 1-1/4 in tube size for flow adaptation
  • Rated 364 psi at 100°F for reliable pressure handling
  • Operates from -20°F to 400°F across wide temperature range

Copper Reducer for Drain Systems

The Nibco 6002 is a wrot copper reducer designed for drain components. It connects a 2 inch fitting end to a 1 1/4 inch copper tube end using an FTG x C joint. The part is new and meets ASME/ANSI B 16.22 standards for plumbing installations.

Pressure and Temperature Headroom

The reducer withstands a maximum pressure of 364 psi at 100 degrees F. Its operating temperature range spans from -20 degrees to 400 degrees F. Within these limits the joint maintains integrity; beyond them the fitting may deform or leak and should not be used.

ASME/ANSI B 16.22 Interface Limits

The connection follows the ASME/ANSI B 16.22 standard for wrought copper solder-joint pressure fittings. This standard defines the dimensions and tolerances for the FTG x C joint. Installations that require different pressure classes, thread types or tube materials fall outside the scope of this reducer.

Highlights

  • Copper construction resists corrosion for long service life
  • FTG x C connection simplifies installation in copper piping systems
  • Reduces 2 in to 1-1/4 in tube size for flow adaptation
  • Rated 364 psi at 100°F for reliable pressure handling
  • Operates from -20°F to 400°F across wide temperature range

Specifications

TypeDrain Components
MaterialHAWA
BrandNibco
Model6002 2x11/4

Questions about this item

Will the 2 in x 1 1/4 in wrot copper reducer join cleanly to older copper pipe of the same nominal sizes?

The fitting uses FTG x C connections with outside diameters of 2-1/8 in and 1-3/8 in, matching standard copper tube dimensions for sweat soldering to existing pipe of those nominal sizes.

How can I verify the joint is sound after soldering the FTG x C reducer?

Pressurise the system up to the rated 364 psi at 100 Degrees F and inspect each soldered joint for leaks; the ASME/ANSI B 16.22 marking confirms the fitting meets the pressure standard.

Does the box contain flux, solder or any installation accessories for the copper reducer?

Only the wrot copper reducer itself is supplied; flux, solder and any required cleaning tools must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.