We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze ball valve with lever handle and hose cap connection

Nibco, Inc.

Nibco, Inc. 5857066HC 3/4" FNPT x Hose Cap Bronze Ball Valve bathware

SKU CH-RS8P-26SDR

Controls water flow with a 3/4 inch FNPT connection and hose cap, rated for 600 psi operating pressure

  • TypeOther
  • Full-port design maximises water flow
  • Stainless-steel ball resists corrosion
  • Bronze body rated for 600 psi water pressure
  • Lever handle provides quick manual shut-off
  • 3/4 in FNPT inlet connects to standard hose threads

3/4" Bronze Ball Valve for Water Lines

This 3/4" FNPT x hose cap bronze ball valve controls water flow in residential and light-commercial plumbing. The two-piece body and full-port stainless-steel ball provide unrestricted passage when open. A lever handle gives quick quarter-turn operation for shut-off or isolation tasks. It is rated for 600 psi maximum operating pressure.

Replaces Gate or Globe Valves in Shut-Off Roles

The quarter-turn action is faster than multi-turn gate or globe valves and reduces the chance of stem leakage over time. Full-port flow matches the pipe inner diameter, so pressure drop stays minimal compared with reduced-port alternatives. The 600 psi rating covers typical municipal supply pressures and many pumped systems. Bronze construction resists dezincification better than standard brass in aggressive water.

Inline Install with Female Threads Both Ends

The valve installs inline between 3/4" male-threaded pipe or fittings on each side. Bronze body threads directly to copper, steel or CPVC adapters without dielectric unions. Stainless-steel ball and PTFE seats handle potable water up to the rated pressure. Lever handle clears most insulation jackets, leaving room for future maintenance. No electrical grounding or special tools are required.

Highlights

  • Full-port design maximises water flow
  • Stainless-steel ball resists corrosion
  • Bronze body rated for 600 psi water pressure
  • Lever handle provides quick manual shut-off
  • 3/4 in FNPT inlet connects to standard hose threads

Specifications

BrandNIBCO
TypeOther

Questions about this item

What thread size and type does the 3/4" FNPT inlet require for a watertight seal?

The valve has a 3/4 inch FNPT female thread. Wrap PTFE tape clockwise on the male pipe threads, then tighten one to two turns past hand-tight.

Which direction should the lever point when the 5857066HC valve is fully open?

Turn the lever so it aligns parallel with the pipe run; perpendicular means closed. The full-port ball gives unrestricted flow in the open position.

How often should the stainless steel ball and PTFE seats be inspected on a water line rated to 600 psi?

Cycle the lever quarterly to prevent seizing. Check for drips at the stem packing annually; replace packing or the two-piece body assembly if leakage appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.