We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact 1U rack-mount hub with front LEDs and rear terminals

NETWORK VIDEO TECHNOLOGIES

NETWORK VIDEO TECHNOLOGIES NV-4PS13-PVD 4 Channel Passive Receiver Hub

SKU CH-8E8Q-7AS09

Four-channel passive receiver hub powers cameras, receives video and sends telemetry over a single Cat5e cable with per-channel 24 V AC or 28 V AC selection and ground-loop immunity

  • Delivers power, video and telemetry over one Cat5e cable
  • 24 V AC or 28 V AC selectable per channel with 1 Amp output
  • Automatic-reset fault and transient protection on every channel
  • Floating outputs eliminate ground-loop interference across all four ports
  • Diagnostic LEDs indicate load status, miswires and overload conditions

4-Channel Passive Receiver Hub

The NETWORK VIDEO TECHNOLOGIES NV-4PS13-PVD is a 4-channel passive receiver hub designed for structured CCTV installations. It receives video, delivers pan/tilt/zoom telemetry and supplies Class 2 SELV camera power over a single 4-pair Cat5e cable. Installers managing multiple cameras from a central rack or wall position will find it fits standard 1U mounting spaces.

Build and mounting practicalities

The unit measures 1U high by 8 inches deep and accepts wall, desk or desk-rack mounting. Each channel provides independently selectable 24 V AC, OFF or 28 V AC output at 1 A with automatic-reset fault and transient protection. Diagnostic LEDs indicate load, no-load, miswire and overload states per channel, while individually floating outputs eliminate ground loops. Pinouts follow EIA/TIA 568B structured cabling standards.

Distance and transceiver dependency

Video bandwidth spans DC to 10 MHz, but usable cable distance depends on the power distance calculator and the specific camera transceiver paired at the far end. The hub requires compatible transceivers such as the NV-216A-PV, NV-218A-PVD or NV-226J-PV at each camera. It does not amplify signals, so installers must verify distance limits for each run before deployment.

Highlights

  • Delivers power, video and telemetry over one Cat5e cable
  • 24 V AC or 28 V AC selectable per channel with 1 Amp output
  • Automatic-reset fault and transient protection on every channel
  • Floating outputs eliminate ground-loop interference across all four ports
  • Diagnostic LEDs indicate load status, miswires and overload conditions

Specifications

No published specifications for this item yet.

Questions about this item

How many video channels does the 4-pair Cat5e interface carry, and what bandwidth does it support?

The hub receives four video channels over a single 4-pair Cat5e cable with a frequency response from DC to 10 MHz per channel.

What rack space and depth are required to mount the unit?

It occupies 1U of rack height and is 8 inches deep, suitable for wall, desk or rack mounting.

How do you set the output voltage for each camera, and what mistake should be avoided?

Use the per-channel 24 V AC / OFF / 28 V AC switch to match the camera requirement; a common error is leaving a channel on the wrong voltage setting, which triggers the diagnostic LED.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.