We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal rack unit with sixteen BNC ports and power switch

NETWORK VIDEO TECHNOLOGIES

NETWORK VIDEO TECHNOLOGIES NV-16PS13-PVD 16-Channel Video Receiver Hub

SKU CH-11HX-VKT2F MPN NV-16PS13-PVD

Sixteen-channel video receiver hub with switchable 24VAC or 28VAC output and 500 W maximum power consumption

  • TypeReceiver
  • 16-channel hub simplifies multi-camera installations
  • Switchable 24VAC or 28VAC output matches camera requirements
  • 115–230VAC input works worldwide without adapters
  • 500W capacity powers up to 16 cameras simultaneously
  • BNC and UTP connectors give flexible wiring options

16-Channel Video Receiver Hub

The NETWORK VIDEO TECHNOLOGIES NV-16PS13-PVD is a 16-channel video receiver hub designed for surveillance installations that need centralised power and signal distribution. It accepts UTP and BNC connections for up to sixteen cameras, making it suitable for installers managing multi-camera sites from a single rack-mount unit.

Sustained load power delivery

Each channel supplies a steady 1 amp at a switchable 24 VAC or 28 VAC output, allowing consistent power to cameras during continuous 24-hour operation. The unit draws up to 500 W from a 115 to 230 VAC source at 50 or 60 Hz, and its internal DC 24 V low-voltage rail supports stable output without thermal throttling over long duty cycles.

Voltage and connector limits

The hub is limited to sixteen BNC video inputs and sixteen UTP data ports, so systems requiring more cameras need additional receiver units. Power input is fixed to nominal 120 or 230 VAC mains, and the three-position output switch offers only 24 VAC, off, or 28 VAC with no intermediate voltage settings.

Highlights

  • 16-channel hub simplifies multi-camera installations
  • Switchable 24VAC or 28VAC output matches camera requirements
  • 115–230VAC input works worldwide without adapters
  • 500W capacity powers up to 16 cameras simultaneously
  • BNC and UTP connectors give flexible wiring options

Specifications

TypeReceiver

Questions about this item

How much power does the NV-16PS13-PVD draw when all 16 channels run continuously?

The unit has a maximum power consumption of 500 W and delivers 1 Amp per channel at a switchable 24 VAC or 28 VAC output.

What cabling and camera types are required to use the 16 BNC video inputs?

Each channel accepts a standard BNC coaxial connection; you need 16 cameras with BNC outputs and matching coax cables to populate every port.

Can the hub power older 24 VAC cameras alongside newer 28 VAC models on the same rack?

Yes, the power output is switchable between 24 VAC and 28 VAC, so legacy 24 VAC cameras and newer 28 VAC units can be powered from the same hub.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.