Netis Systems
Netis Systems P110C 10-port Fast Ethernet PoE+ switch handheld pcs accessory
10-port Fast Ethernet PoE+ switch delivers up to 30 W per port and 120 W total for IP cameras and access points
- ColorBlack
- CompatibilityIEEE 802.3af/at Compliant
- SpecificationsUp to 30W for each PoE port, 120W for all PoE port ; Switchi
- FeaturesSupporting 802.3 Ethernet, 802.u Faster Ethernet, POE IEEE 8
- Powers IP cameras with up to 30W per PoE port
- 120W total PoE budget runs multiple devices simultaneously
- 10 Fast Ethernet ports expand wired connectivity instantly
- Auto MDI/MDIX removes crossover cable hassle
- Extended mode reaches 250m for distant installations
10-port Fast Ethernet PoE+ switch
The Netis Systems P110C provides ten 10/100 Mbps RJ45 ports with Auto MDI/MDIX for expanding a wired network. Eight ports deliver PoE/PoE+ power compliant with IEEE 802.3af/at standards. Two dedicated uplink ports connect the switch to a server or NVR for camera traffic aggregation.
PoE deployments up to 250 m range
Installers powering IP cameras or wireless access points over long cable runs benefit from the extended mode reaching 250 m at 10 Mbps. The 120 W total PoE budget limits simultaneous high-draw devices, so sites needing more than 30 W per port or Gigabit uplinks should consider other hardware.
Check cabling and power budget
Verify that existing Cat5e or better cabling supports the required distance and that the combined draw of all powered devices stays within the 120 W limit. Each PoE port supplies up to 30 W, so count cameras or APs before ordering. Ensure the rack or desktop space accommodates the unit's desktop form factor.
Highlights
- Powers IP cameras with up to 30W per PoE port
- 120W total PoE budget runs multiple devices simultaneously
- 10 Fast Ethernet ports expand wired connectivity instantly
- Auto MDI/MDIX removes crossover cable hassle
- Extended mode reaches 250m for distant installations
Specifications
| Brand | Netis |
|---|---|
| Model | P110C |
| Color | Black |
| Compatibility | IEEE 802.3af/at Compliant |
| Specifications | Up to 30W for each PoE port, 120W for all PoE port ; Switching Fabric Capacity 2G; Fast Ethernet (100-Mbit/s) ; 2K MAC address table, MAC address auto-learning |
| Features | Supporting 802.3 Ethernet, 802.u Faster Ethernet, POE IEEE 802.3af/at compliant Powered Device (PD), Modes: Normal switch mode/Extended mode, Two uplink ports are design for the set of 4 security camera, To upload your image or video onto server or NVR, Ports 1~8 features POE power supply capability, Auto MDI/MDIX crossover for all ports, Full-duplex based on IEEE802.3x, Half-duplex based on Backpressure, Non-blocking wire-speed forwarding, MAC address auto-learning & auto-aging, Steel case, the total POE power budget of 120 W, Plug and Play, Over-current, over-voltage and short-circ |
| Shipping weight | 1.04 kg |
| Package size | 203 × 152 × 51 mm |
Questions about this item
Do I need IEEE 802.3af/at powered devices to use the eight PoE ports?
Yes, ports 1–8 auto-detect and supply power only to devices that comply with the IEEE 802.3af/at standard.
Will my existing 10/100 Mbps cameras and APs negotiate correctly with the 100 Mbit/s uplink ports?
The two uplink ports are 10/100 Mbps adaptive RJ45 with Auto MDI/MDIX, so legacy 100 Mbit/s gear links without manual crossover cables.
How can I verify the 120 W PoE budget is not exceeded after connecting cameras?
Each PoE port delivers up to 30 W; add the rated draw of every connected device and confirm the total stays at or below 120 W.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



