We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal rackmount switch with 26 RJ45 ports and LED indicators

NETGEAR ProSafe YS20242F-P 26-port PoE+ network switch

SKU CH-06KR-B1WXQ

A 26-port PoE+ switch with 24 Fast Ethernet ports, two Gigabit uplinks and a 400 W power budget

  • FormatDesktop
  • StandardsPassive PoE
  • Network MediaRJ45
  • Uplink Ports8
  • Uplink InterfaceRJ45
  • Uplink Speed10/100 Mbps
  • 24 PoE+ ports power cameras and phones without extra adapters
  • 400 W total PoE budget delivers up to 30 W per port simultaneously
  • Two Gigabit uplink ports provide 1000 Mbps backbone connectivity
  • VLAN isolation on ports 1–24 separates traffic for added security
  • Plug-and-play operation requires no configuration to start

26-port PoE+ switch for IP deployments

The NETGEAR ProSafe YS20242F-P delivers 24 PoE/PoE+ ports at 10/100 Mbps plus two Gigabit uplink ports. It targets installers who need to power IP cameras, wireless access points or VoIP phones from a single rack-mount unit. Plug-and-play operation means no configuration is required before devices connect.

400 W budget with 30 W per-port ceiling

The 400 W total PoE budget comfortably runs two dozen 15.4 W class 3 devices or a mix of 30 W class 4 endpoints. Beyond the aggregate limit the switch cannot supply additional power, so dense high-draw loads will saturate the budget before all 24 ports are used. Uplink bandwidth tops out at 1 Gbps per port.

Upgrade from 8- or 16-port PoE switches

Moving from smaller PoE switches eliminates the need for multiple power supplies and uplink cables between cabinets. The jump is worth it when camera counts exceed 16 or when a single 400 W budget simplifies cabling and reduces rack space. Networks that already require Gigabit to every endpoint will not gain port speed from this model.

Highlights

  • 24 PoE+ ports power cameras and phones without extra adapters
  • 400 W total PoE budget delivers up to 30 W per port simultaneously
  • Two Gigabit uplink ports provide 1000 Mbps backbone connectivity
  • VLAN isolation on ports 1–24 separates traffic for added security
  • Plug-and-play operation requires no configuration to start

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberYS20242F-P
FormatDesktop
StandardsPassive PoE
Network MediaRJ45
Uplink Ports8
Uplink InterfaceRJ45
Uplink Speed10/100 Mbps
Uplink Speed/TypeRJ45
Primary Port Count26
Primary Ports16 x SFP + 8 x RJ45
Primary Port Speed10/100Mbps + 1000Mbps
Primary Port TypeRJ45
Management InterfaceRJ45
Jumbo Frames9216 bytes
Packet Forwarding Rate1000 megabits_per_second
Buffer Memory768KB
PoENo
SNMPNo
Layer 2 FeaturesRJ45, 1000 megabits_per_second, 26
Layer 3 Features26 Port / 24*PoE+ (400w)
CablingRJ45
PowerAC 120/230 V ( 50/60 Hz )
Max Power Consumption48 volts
Dimensions14.33in W x 12.83in H x 9.06in D
Weight2.041 kilograms
Certificationnot_applicable
Max Heat Dissipation400 watts
Features26, RJ45, 1000 megabits_per_second, Metal, Grey

Questions about this item

Will the 24 PoE+ ports at 10/100 Mbps work with my older 10 Mbps IP cameras and VoIP phones?

Yes, each PoE+ port auto-negotiates down to 10 Mbps half or full duplex, so legacy 10 Mbps cameras and phones connect and receive power without configuration.

Which front-panel LEDs confirm the switch is forwarding traffic and delivering PoE power on the 24 RJ45 ports?

Each port shows a Link/Act LED for data and a PoE LED that lights when a powered device is drawing up to 30 W; the two Gigabit uplink ports have their own Link/Act indicators.

Does the box include SFP transceivers for the 16 SFP slots, or must they be purchased separately?

The package contains the switch, a rack-mount kit, a power cord and a quick-start guide; SFP transceivers for the 16 SFP ports are not included and must be bought separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.