We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black metal desktop switch with ten front RJ45 ports and two uplink ports

NETGEAR ProSafe VM-0820GP-CA 10-Port Gigabit PoE Switch

SKU CH-JYC5-GJNGX

Unmanaged 10-port gigabit PoE+ switch with 8 powered ports, 2 uplinks, AI watchdog, VLAN isolation and 250 m extended reach

  • FormatDesktop
  • Network Management TypeUnmanaged
  • Uplink Ports8
  • Primary Port Count10
  • Primary Ports16 x SFP + 8 x RJ45
  • Management Feature1* User Manual, 1* 10-Port Gigabit PoE Switch, 1* Power Cabl
  • Eight PoE+ ports power cameras and access points over one cable
  • Two dedicated uplink ports connect the switch to NVRs or routers
  • AI Watchdog automatically restarts frozen ports to keep devices running
  • One-Key VLAN isolates ports 1-8 from each other for security
  • Extend mode reaches 250 m at 10 Mbps for long cable runs

10-Port Gigabit PoE Switch

The NETGEAR ProSafe VM-0820GP-CA is a desktop unmanaged switch with 10 gigabit ports, eight of which deliver PoE+ power. A 120-watt budget feeds cameras, access points or VoIP phones over the same cable that carries data. Plug-and-play operation requires no configuration.

Installers needing simple PoE and VLAN isolation

The one-key VLAN mode separates ports one to eight while keeping uplink paths open, useful for small surveillance or Wi-Fi rollouts. AI Watchdog restarts frozen ports automatically. Buyers who need SNMP monitoring, Layer 3 routing or a managed feature set should look at a managed switch instead.

120-watt PoE budget

Total PoE power is 120 watts across the eight PoE+ ports; the spec sheet does not break this down per port. Calculate the draw of every powered device before purchase to confirm the budget covers the load.

Highlights

  • Eight PoE+ ports power cameras and access points over one cable
  • Two dedicated uplink ports connect the switch to NVRs or routers
  • AI Watchdog automatically restarts frozen ports to keep devices running
  • One-Key VLAN isolates ports 1-8 from each other for security
  • Extend mode reaches 250 m at 10 Mbps for long cable runs

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberVM-0820GP-CA
FormatDesktop
Network Management TypeUnmanaged
Uplink Ports8
Primary Port Count10
Primary Ports16 x SFP + 8 x RJ45
Management Feature1* User Manual, 1* 10-Port Gigabit PoE Switch, 1* Power Cable
Jumbo Frames9216 bytes
Packet Forwarding Rate1000 megabits_per_second
Buffer Memory768KB
PoENo
SNMPNo
Layer1
Layer 2 Features1000 megabits_per_second, 10
Layer 3 Features[NEW]10 Port / 8xPoE+120W / 2xUPLink
Certificationnot_applicable
Max Heat Dissipation120 watts
Features10, 1* User Manual, 1* 10-Port Gigabit PoE Switch, 1* Power Cable, 1000 megabits_per_second, Metal, Black
Package Contents1* User Manual, 1* 10-Port Gigabit PoE Switch, 1* Power Cable

Questions about this item

How do I install this 10-port unmanaged switch and enable the 250-metre extend mode?

Connect the power cable, link devices to the eight PoE+ RJ45 ports and the two uplink ports, then slide the Extend switch to On; the ports drop to 10 Mbps but reach 250 metres.

What maintenance will the 120-watt PoE budget and fanless metal chassis need over time?

No moving parts to service; keep ventilation slots clear of dust and verify the total connected load stays within 120 watts.

Which limit appears first when all eight PoE+ ports run continuously at full 1000 Mbps?

The 120-watt PoE budget and 120-watt heat dissipation cap are reached before the 768 KB buffer or 9216-byte jumbo frames become bottlenecks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.