We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal network switch with ten RJ45 ports and one SFP slot

NETGEAR ProSafe TEG1110PF-8-120W 10 Port Gigabit PoE+ Switch

SKU CH-05TQ-A0MDQ

A 10-port unmanaged switch with eight PoE+ ports delivering up to 30W each and a 120W total budget, plus one Gigabit RJ45 and one SFP uplink, VLAN isolation, and an extend mode reaching 250 metres

  • FormatDesktop
  • StandardsPassive PoE
  • Network MediaRJ45,SFP,PoE
  • Network Management TypeUnmanaged
  • Uplink Ports8
  • Uplink InterfaceRJ45
  • 120W total PoE budget powers up to eight devices
  • 30W per port maximum supports WiFi 6 access points and HD cameras
  • 250m Extend Mode reaches distant IP cameras at 10Mbps
  • VLAN isolation on ports 1-8 blocks broadcast storms and DHCP spoofing
  • SFP and RJ45 uplinks enable fibre or copper long-range links

ProSafe 10-port PoE+ switch

The NETGEAR ProSafe TEG1110PF-8-120W is a 10-port Gigabit switch with eight PoE+ ports delivering up to 30 W each and a 120 W total power budget. It is built for installers deploying IP cameras, VoIP phones or WiFi 6 access points without separate power supplies. Unmanaged operation means no configuration is required.

Silent metal chassis with Extend Mode

The sturdy metal housing runs fanless so the switch adds no audible noise to an office or equipment closet. In Extend Mode the PoE+ ports push data and power up to 250 m, with speeds dropping to 10 Mbps beyond 100 m. Jumbo frame support to 9216 bytes and a 768 KB buffer handle bursty surveillance traffic without extra cooling.

Desktop or wall mount with dual uplink

The compact desktop format includes wall-mount brackets for flexible placement in cabinets or on walls. One Gigabit RJ45 uplink and one SFP uplink give fibre or copper backhaul options without cascading switches. VLAN mode isolates ports 1–8 from each other while keeping uplink communication, limiting broadcast storms and DHCP spoofing on surveillance networks.

Highlights

  • 120W total PoE budget powers up to eight devices
  • 30W per port maximum supports WiFi 6 access points and HD cameras
  • 250m Extend Mode reaches distant IP cameras at 10Mbps
  • VLAN isolation on ports 1-8 blocks broadcast storms and DHCP spoofing
  • SFP and RJ45 uplinks enable fibre or copper long-range links

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberTEG1110PF-8-120W
FormatDesktop
StandardsPassive PoE
Network MediaRJ45,SFP,PoE
Network Management TypeUnmanaged
Uplink Ports8
Uplink InterfaceRJ45
Uplink Speed10/100 Mbps
Uplink Speed/TypeRJ45,SFP,PoE
Primary Port Count10
Primary Ports16 x SFP + 8 x RJ45
Primary Port Speed10/100Mbps + 1000Mbps
Primary Port TypeRJ45,SFP,PoE
Management InterfaceRJ45,SFP,PoE
Management FeaturePower Adapter
Jumbo Frames9216 bytes
Packet Forwarding Rate1000 gigabits_per_second
Buffer Memory768KB
PoENo
SNMPNo
Layer1
Layer 2 FeaturesRJ45,SFP,PoE, 1000 gigabits_per_second, 10
Layer 3 Features10 Port/8 PoE+@120W
CablingRJ45,SFP,PoE
Dimensions14.33in W x 12.83in H x 9.06in D
Certificationnot_applicable
Features10, RJ45,SFP,PoE, Power Adapter, 1000 gigabits_per_second, black
Package ContentsPower Adapter

Questions about this item

How do I mount the TEG1110PF-8-120W and connect the 8 PoE+ ports so the 120W budget is not exceeded?

Fix the metal chassis to a wall or desk, plug each IP camera or VoIP phone into ports 1–8 using Cat5e or better cable, and keep the combined draw of all powered devices at or below 120W; the switch itself needs no software setup.

What ongoing upkeep does the 10-port PoE+ switch require?

No fan or replaceable modules are present; periodically dust the ventilation slots, verify that the total PoE load stays under 120W, and replace any patch cable that shows wear.

At what point does the 250 m Extend Mode distance limit affect camera performance?

Beyond 100 m the link drops to 10 Mbps, so bandwidth-heavy HD streams may stutter even though power still reaches 250 m.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.