NETGEAR ProSafe TEG1105P-4-63W 5 Port Gigabit PoE+ Switch 63W
Five-port gigabit PoE+ switch delivers up to 30 W per port and 63 W total for IP cameras, VoIP phones or WiFi 6 access points.
- FormatDesktop
- StandardsPassive PoE
- Network MediaRJ45
- Network Management TypeUnmanaged
- Uplink Ports8
- Uplink InterfaceRJ45
- Powers IP cameras and VoIP phones directly with 63 W total PoE+ budget
- Four PoE+ ports deliver up to 30 W each for WiFi 6 access points
- VLAN mode isolates ports 1–4 to stop broadcast storms and DHCP spoofing
- Extend mode pushes data and power up to 250 m for long surveillance runs
- Fanless metal chassis gives silent operation and 6 kV lightning protection
5-Port Gigabit PoE+ Switch
The NETGEAR ProSafe TEG1105P-4-63W is an unmanaged desktop switch with five RJ45 ports. Four ports deliver IEEE 802.3af/at PoE+ power alongside data, while the fifth serves as a standard uplink. It targets installers deploying IP cameras, VoIP phones or WiFi 6 access points without local power outlets.
63 W total PoE budget
The switch supplies up to 30 W per PoE+ port within a 63 W total power budget. This single figure determines how many powered devices can run simultaneously. Exceeding the budget will cause ports to shut down, so the installer must sum device draw before connecting.
Fanless metal chassis for silent operation
A fanless metal enclosure allows silent deployment in offices or ceiling voids. The unit supports desktop or wall mounting and accepts both active PoE, passive PoE and non-PoE devices on every port. VLAN isolation mode separates ports one to four while keeping uplink communication, and Extend Mode pushes data and power to 250 m at 10 Mbps.
Highlights
- Powers IP cameras and VoIP phones directly with 63 W total PoE+ budget
- Four PoE+ ports deliver up to 30 W each for WiFi 6 access points
- VLAN mode isolates ports 1–4 to stop broadcast storms and DHCP spoofing
- Extend mode pushes data and power up to 250 m for long surveillance runs
- Fanless metal chassis gives silent operation and 6 kV lightning protection
Specifications
| Brand | NETGEAR |
|---|---|
| Series | ProSafe |
| Part Number | TEG1105P-4-63W |
| Format | Desktop |
| Standards | Passive PoE |
| Network Media | RJ45 |
| Network Management Type | Unmanaged |
| Uplink Ports | 8 |
| Uplink Interface | RJ45 |
| Uplink Speed | 10/100 Mbps |
| Uplink Speed/Type | RJ45 |
| Primary Port Count | 5 |
| Primary Ports | 16 x SFP + 8 x RJ45 |
| Primary Port Speed | 10/100Mbps + 1000Mbps |
| Primary Port Type | RJ45 |
| Management Interface | RJ45 |
| Management Feature | Blu-ray |
| Jumbo Frames | 9216 bytes |
| Packet Forwarding Rate | 1000 megabits_per_second |
| Buffer Memory | 768KB |
| IPv4 Features | 5 Port w/4 PoE+ |
| PoE | No |
| SNMP | No |
| Layer | 1 |
| Layer 2 Features | RJ45, 1000 megabits_per_second, 5 |
| Layer 3 Features | TEG1105P |
| Cabling | RJ45 |
| Button | application |
| PoE Power Budget | 5 Port w/4 PoE+ |
| Power | AC 120/230 V ( 50/60 Hz ) |
| Max Power Consumption | 1.5 amps, 50 volts_of_alternating_current |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Certification | not_applicable |
| Max Heat Dissipation | 63 watts |
| Features | 5, RJ45, application, Blu-ray, 1000 megabits_per_second, Metal, White |
| Package Contents | Blu-ray |
Questions about this item
How much total power can the switch deliver to connected PoE+ devices?
The switch provides up to 63 W total PoE+ budget across its four powered ports, with a maximum of 30 W per port.
Which PoE standards do the four powered ports comply with?
The four PoE+ ports are compliant with IEEE 802.3af and IEEE 802.3at, delivering up to 30 W per port for compatible devices.
What mounting options are available for this desktop switch?
The metal-cased switch supports both desktop placement and wall mounting for flexible installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SonicWall 01-SSC-1465 Capture Advanced Threat Protection hardware license 1 Year TZ600 Series
- Capture Advance Thr…



