We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal six-port switch with four RJ45 and two SFP+ cages, fanless desktop or wall-mount design

NETGEAR ProSafe GT-ST024 6-Port 2.5G/10G SFP+ Switch

SKU CH-R11S-1KAAW

Six-port unmanaged switch with four 2.5G RJ45 ports and two 10G SFP+ uplinks, 60Gbps switching capacity, fanless metal chassis

  • Primary Port Count6
  • Primary Ports16 x SFP + 8 x RJ45
  • Jumbo Frames9216 bytes
  • Packet Forwarding Rate60 gigabits_per_second
  • SNMPNo
  • Layer 2 Features60 gigabits_per_second, 6
  • Silent operation through fanless metal chassis design
  • Four 2.5G RJ45 ports with auto-negotiation up to 2.5G
  • Two 10G SFP+ slots for fibre or copper uplinks
  • 60Gbps switching capacity with 44.64Mpps forwarding rate
  • Low 1.25–1.3W idle draw and wall-mount ready

6-Port Multi-Gig Switch for Home Labs

The NETGEAR ProSafe GT-ST024 delivers four 2.5G Base-T ports and two 10G SFP+ slots in a fanless metal chassis. It provides 60Gbps switching capacity and a 44.64Mpps forwarding rate for high-speed local traffic. The unmanaged design requires no configuration, making it suited for enthusiasts expanding a home or small-office network.

Silent Operation Limits Heavy Uplink Loads

Buyers who need completely silent operation will appreciate the passively cooled metal shell that dissipates heat without a fan. Those requiring managed features such as VLANs, SNMP or link aggregation should look elsewhere, as this model is strictly unmanaged. The SFP+ ports may not support specialised GPON or XGSPON modules from certain ISPs, so fibre-to-the-home uplink scenarios should be verified first.

External 12V Supply and Wall-Mount Kit Included

A 12V DC power adapter is bundled, drawing under 1.3W at idle and below 12W at full load. Non-slip feet and integrated mounting holes allow desktop or wall installation without extra hardware. No SFP+ transceivers, DAC or AOC cables are supplied, so uplink media must be sourced separately.

Highlights

  • Silent operation through fanless metal chassis design
  • Four 2.5G RJ45 ports with auto-negotiation up to 2.5G
  • Two 10G SFP+ slots for fibre or copper uplinks
  • 60Gbps switching capacity with 44.64Mpps forwarding rate
  • Low 1.25–1.3W idle draw and wall-mount ready

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberGT-ST024
Primary Port Count6
Primary Ports16 x SFP + 8 x RJ45
Jumbo Frames9216 bytes
Packet Forwarding Rate60 gigabits_per_second
SNMPNo
Layer 2 Features60 gigabits_per_second, 6
Layer 3 Features4 Port 2.5Gb Switch
PowerAC 120/230 V ( 50/60 Hz )
Max Power Consumption12 volts
Dimensions14.33in W x 12.83in H x 9.06in D
Max Heat Dissipation12 watts
Features6, 60 gigabits_per_second, Metal, Black

Questions about this item

What type of SFP+ modules or cables do I need for the two 10G uplink ports?

The 10G SFP+ slots accept 10M, 100M, 1G, 2.5G and 10G speeds and work with GoodTop RJ45 copper modules, optical fibre SFP+ modules, 10G DAC and AOC cables; GPON or XGSPON modules from some ISPs may not be supported.

Will my existing 1G and 100M devices connect to the four 2.5G Base-T ports?

Yes, each 2.5G port auto-negotiates down to 10, 100 or 1000 Mbps and supports Auto MDI/MDIX so legacy devices link without crossover cables.

How can I confirm the switch is delivering its rated 60Gbps switching capacity after installation?

The front-panel LEDs show link and activity per port; sustained throughput at line rate across all six ports with 9216-byte jumbo frames indicates the 60Gbps fabric and 44.64Mpps forwarding rate are operating as specified.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.