We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver aluminium switch with four RJ45 and two SFP+ ports

NETGEAR ProSafe 4×2.5G + 2×10G SFP+ Unmanaged Switch

SKU CH-1AZ0-SGXRD

A six-port unmanaged switch with four 2.5G RJ45 ports, two 10G SFP+ uplinks, fanless aluminium cooling and magnetic mounting

  • StandardsPassive PoE
  • Network MediaSFP+, RJ45
  • Network Management TypeUnmanaged
  • Uplink InterfaceRJ45
  • Uplink Speed10/100 Mbps
  • Uplink Speed/TypeSFP+, RJ45
  • Fanless aluminum alloy housing cuts heat by 40% for silent operation
  • Four 2.5GBase-T RJ45 ports plus two 10G SFP+ slots deliver multi-gigabit throughput
  • Unmanaged plug-and-play design needs no configuration for instant network expansion
  • Four strong magnetic pads and rubber feet enable flexible mounting on metal or flat surfaces
  • Jumbo frame support up to 9216 bytes reduces packet overhead for large transfers

6-Port Multi-Gigabit Switch

The NETGEAR ProSafe switch provides four 2.5G Base-T RJ45 ports and two 10G SFP+ slots in an unmanaged, fanless design. An aluminium alloy casing aids passive cooling for silent operation. Magnetic feet and rubber pads allow flexible mounting on metal racks or desktop surfaces. It supports jumbo frames up to 9216 bytes for efficient large-packet handling.

Suits Quiet Multi-Gigabit Edge Links

This switch fits home offices, media cabinets or LAN-party setups needing 2.5G connectivity to PCs, consoles, NAS units or Wi-Fi access points without configuration. The unmanaged Layer 1 operation means no VLAN, QoS or SNMP features are available. Buyers who need managed features, PoE power output or 1G-only RJ45 uplinks should consider other models.

Four 2.5G RJ45 Ports Decide Fit

The primary specification is the count of four 2.5G Base-T copper ports combined with two 10G SFP+ uplinks. If your devices require more than four multi-gigabit copper connections, this unit will not suffice. The 9216-byte jumbo frame support and fanless aluminium build complete the profile for noise-sensitive, high-throughput edge deployments.

Highlights

  • Fanless aluminum alloy housing cuts heat by 40% for silent operation
  • Four 2.5GBase-T RJ45 ports plus two 10G SFP+ slots deliver multi-gigabit throughput
  • Unmanaged plug-and-play design needs no configuration for instant network expansion
  • Four strong magnetic pads and rubber feet enable flexible mounting on metal or flat surfaces
  • Jumbo frame support up to 9216 bytes reduces packet overhead for large transfers

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberSL902-SWTG024AS-JP2
StandardsPassive PoE
Network MediaSFP+, RJ45
Network Management TypeUnmanaged
Uplink InterfaceRJ45
Uplink Speed10/100 Mbps
Uplink Speed/TypeSFP+, RJ45
Primary Port Count4
Primary Ports16 x SFP + 8 x RJ45
Primary Port Speed10/100Mbps + 1000Mbps
Primary Port TypeSFP+, RJ45
Management InterfaceSFP+, RJ45
Management FeatureUser Manual, 6 Port 2.5G Ethernet Switch, 1 Power Cord,4 Magnetic Feet
Jumbo Frames9216 bytes
Packet Forwarding Rate2.5 gigabits_per_second
Securitytrue
SNMPNo
Layer1
Layer 2 FeaturesSFP+, RJ45, 2.5 gigabits_per_second, 4
Layer 3 Features4X2.5G RJ45+2X10G SFP+(Unmanaged)
CablingSFP+, RJ45
PoE Ports48 x PoE
Certificationtrue, not_applicable
Features4, SFP+, RJ45, User Manual, 6 Port 2.5G Ethernet Switch, 1 Power Cord,4 Magnetic Feet, 2.5 gigabits_per_second, Aluminum, Grey
Package ContentsUser Manual, 6 Port 2.5G Ethernet Switch, 1 Power Cord,4 Magnetic Feet

Questions about this item

How much heat does the aluminium alloy casing remove during all-day operation?

The upgraded aluminium alloy housing reduces heat by 40% versus steel, and the fanless design keeps the switch silent while maintaining consistent 2.5 GbE speeds.

Which cables and modules must I already have to use the four 2.5GBase-T ports and two 10G SFP+ slots?

You need Cat5e or better RJ45 cables for the 2.5 Gbps copper ports and compatible 10G SFP+ transceivers with fibre or direct-attach cables for the uplink slots.

Will the 9216-byte jumbo frame support work with my older 1 Gbps NAS and 100 Mbps IP cameras?

Yes, the switch auto-negotiates each port speed, so 1 Gbps and 100 Mbps devices connect normally while still benefiting from the 9216-byte jumbo frame capability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.