We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U rack-mount switch with 48 RJ45 ports and four SFP+ cages

Netgear Inc.

Netgear Inc. GSM4352PA-100NES network switch

SKU CH-ZFD6-1VF9E MPN GSM4352PA-100NES

Managed stackable switch with 48 Gigabit PoE+ ports, four 10 Gbps uplinks and Layer 3 routing

  • FormatStackable
  • Network Management TypeManaged
  • Primary Ports48 x RJ45 + 4 x SFP+
  • Primary Port Speed10 Gbps
  • Primary Port Type48 x Gigabit PoE+ ports 2 x 10GBASE-T, 2 x 10GBASE-X SPF+ up
  • ProtocolsTCP/IP
  • 48 Gigabit PoE+ ports power devices directly
  • 4 independent 10G uplinks enable progressive 10G migration
  • 480 W PoE+ budget covers all 48 ports
  • Hot-swap 550 W PSU keeps the stack running
  • 176 Gbps non-blocking fabric handles full line-rate traffic

Product Identity

This Netgear GSM4352PA-100NES is a stackable Layer 3 managed switch built for campus and branch deployments that need dense PoE+ access. It delivers 48 Gigabit PoE+ ports plus four 10 Gigabit uplink interfaces in a single rack-mountable unit.

Ideal Fit and Limits

Network teams needing 48 powered ports with 480 W redundant PoE+ budget and 10 Gbps uplinks for servers or aggregation will find the feature set aligned. Buyers who need higher per-port PoE power or more than 52 ports per stack member should evaluate higher-tier chassis instead.

Deciding Specification

The 480 W redundant PoE+ budget across all 48 ports determines how many access points, cameras or phones can run simultaneously at full Class 4 power without exceeding the supply.

Highlights

  • 48 Gigabit PoE+ ports power devices directly
  • 4 independent 10G uplinks enable progressive 10G migration
  • 480 W PoE+ budget covers all 48 ports
  • Hot-swap 550 W PSU keeps the stack running
  • 176 Gbps non-blocking fabric handles full line-rate traffic

Specifications

BrandNETGEAR
SeriesProSafe
ModelGSM4352PA-100NES
FormatStackable
Network Management TypeManaged
Primary Ports48 x RJ45 + 4 x SFP+
Primary Port Speed10 Gbps
Primary Port Type48 x Gigabit PoE+ ports
2 x 10GBASE-T, 2 x 10GBASE-X SPF+ uplink
ProtocolsTCP/IP
PoEYes
Layer3
Power550W PSU
Weight19.66
FeaturesThe M4300-52G-PoE+ provides 48 Gigabit PoE+ ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplink connectivity
All (4) 10G ports are independent and 1G backward compatible for progressive transition to 10G speeds
Hot swap APS550W power supplies deliver 480W redundant PoE+ budget across 48 ports, or 720W in share mode
With 176 Gbps non-blocking fabric, M4300-52G-PoE+ delivers L2 / L3 / L4 and IPv4 / IPv6 rich services for wireless access layer, IP video and unified
communications
Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover for highest availability (HA
Package ContentsSwitch
Power cord (s)
Console cable with one DB9 connector and one RJ-45 connector
USB console cable with one mini B connector and one type A connector
Rubber caps for the SFP / SFP+ sockets
Rack-mounting kit: the full-width models include two regular (short) brackets and screws
Rubber footpads for tabletop installation
Installation guide
Resource CD with the following manuals and software:
Software setup manual
CLI manual
Software administration guide
Hardware installation guide
The driver for use with the USB console cable
Shipping weight9.39 kg
Package size560 × 543 × 146 mm

Questions about this item

How much heat and power does the 550W PSU draw when all 48 PoE+ ports run at full load all day?

The 550W supply feeds a 480W PoE+ budget across the 48 ports, rising to 720W in share mode, so sustained full-load heat matches that draw.

Which SFP+ modules and patch cables must I already own to use the four 10G uplink ports?

The four independent 10G ports accept 10GBASE-T RJ45 or 10GBASE-X SFP+ transceivers; you supply the matching modules and fibre or copper cables.

Will my existing 1G access points and cameras negotiate down correctly on the 48 PoE+ ports?

Yes — every 10G port is 1G backward compatible, so 10/100/1000Base-TX devices connect and receive PoE+ without extra configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.