We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Netgear Inc.

Netgear Inc. GSM4352-100NES 48-port managed Gigabit PoE+ switch with 4 SFP+ uplinks

SKU CH-9WDD-3JREF MPN GSM4352-100NES

Managed 48-port Gigabit PoE+ switch with 4 SFP+ uplinks, 236 W PoE budget and Layer 3 routing for AV-over-IP deployments

  • Network Management TypeManaged
  • Primary Ports48 x RJ45 + 4 x SFP+
  • PoEYes
  • Layer3
  • 48 Gigabit PoE+ ports power cameras and access points directly
  • 4 SFP+ uplinks at 10 Gbit/s link switches without bottlenecks
  • 236 W PoE budget from 550 W supply feeds many devices
  • Layer 3 routing plus IGMP Plus keeps AV traffic flowing
  • Dual modular PSU slots give 1+1 redundancy for uptime

48-port managed Gigabit PoE+ switch

The Netgear GSM4352-100NES is a Layer 3 managed switch with 48 RJ45 Gigabit ports that support PoE+ and four SFP+ uplink ports. It is built for AV-over-IP installations that need both data and power delivered over a single cable. The integrated 550 W power supply provides a 236 W PoE budget for connected devices. Two modular power-supply slots allow 1+1 redundancy or load sharing.

Upgrade from unmanaged or non-PoE switches

This switch replaces unmanaged or non-PoE edge switches when you need centralised management, multicast control and power for endpoints such as cameras, access points or AV encoders. The jump is worth it when your installation requires IGMP Plus for multicast traffic, Auto-LAG for uplink aggregation or the Engage Controller for multi-switch orchestration. It also adds redundant power-supply capability that entry-level switches lack.

48 PoE+ ports with 236 W budget and 10 Gbps uplinks

The 48 ports comfortably handle typical AV-over-IP loads including Dante, AES67, NDI 4, NDI 5 and SMPTE ST 2110 streams when the total PoE draw stays within 236 W. Four 10 Gbps SFP+ uplinks provide headroom for aggregating multiple streams toward the core. The PoE budget runs out when many high-power devices are connected simultaneously, and the 10 Gbps uplinks can saturate if aggregate traffic exceeds that rate.

Highlights

  • 48 Gigabit PoE+ ports power cameras and access points directly
  • 4 SFP+ uplinks at 10 Gbit/s link switches without bottlenecks
  • 236 W PoE budget from 550 W supply feeds many devices
  • Layer 3 routing plus IGMP Plus keeps AV traffic flowing
  • Dual modular PSU slots give 1+1 redundancy for uptime

Specifications

BrandNETGEAR
Part NumberGSM4352100NES
Network Management TypeManaged
Primary Ports48 x RJ45 + 4 x SFP+
PoEYes
Layer3
Shipping weight10.43 kg
Package size599 × 582 × 112 mm

Questions about this item

Does the 48-port PoE+ switch include mounting brackets for a standard equipment rack?

The switch is a rackmount unit designed for installation in a standard equipment rack using the supplied brackets.

What is the correct order for inserting the modular power supplies into the two available slots to enable 1+1 redundancy?

Install a power supply in each of the two modular slots; the system automatically configures 1+1 redundancy and EPS sharing once both units are seated and powered on.

How often should the internal cooling fans be cleaned to maintain airflow through the 48 RJ45 ports and four SFP+ uplinks?

Inspect and clean the fan vents every six months or sooner in dusty environments to prevent airflow restriction across the PoE+ ports and uplink modules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.