We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal desktop switch with 15 RJ45 ports and one SFP uplink slot

Netgear Inc.

Netgear Inc. GS116EPP-100NAS 16-port Gigabit PoE+ network switch

SKU CH-21BH-2DEBZ MPN GS116EPP-100NAS

A 16-port Gigabit PoE+ switch with 15 RJ45 ports, one SFP uplink, smart management and a 231 W power budget

  • FormatDesktop, Wall Mountable, Enclosure
  • Standards10/100/1000Base-T
  • Network MediaTwisted Pair, Optical Fiber
  • Network Management TypeSmart
  • Uplink Ports1
  • Uplink InterfaceSFP
  • 16 Gigabit ports power IP cameras and APs with 231 W PoE+ budget
  • Smart Layer 2 management adds VLANs and QoS for traffic control
  • Single SFP uplink connects fibre for longer runs
  • 9216-byte jumbo frames move large data blocks efficiently
  • Desktop or wall-mount metal enclosure fits tight spaces

16-port Gigabit PoE+ switch

The Netgear GS116EPP-100NAS is a 16-port Gigabit Easy Smart switch with PoE+ support. It provides 15 RJ45 copper ports and one SFP uplink slot for fibre connectivity. The unit is designed for desktop or wall-mount installation and operates at Layer 2 with a 231W PoE power budget.

Suits small offices adding IP phones or cameras

This switch fits deployments that need PoE+ for access points, VoIP handsets or security cameras without a full management stack. It is not for buyers who require Layer 3 routing, stackable chassis aggregation or a higher port count than 16 ports.

231W total PoE budget decides device density

The 231W PoE budget is the single figure that determines how many powered devices can run simultaneously. Check each endpoint's draw against this limit before purchasing.

Highlights

  • 16 Gigabit ports power IP cameras and APs with 231 W PoE+ budget
  • Smart Layer 2 management adds VLANs and QoS for traffic control
  • Single SFP uplink connects fibre for longer runs
  • 9216-byte jumbo frames move large data blocks efficiently
  • Desktop or wall-mount metal enclosure fits tight spaces

Specifications

BrandNETGEAR
ModelGS116EPP-100NAS
Part NumberGS116EPP-100NAS
FormatDesktop, Wall Mountable, Enclosure
Standards10/100/1000Base-T
Network MediaTwisted Pair, Optical Fiber
Network Management TypeSmart
Uplink Ports1
Uplink InterfaceSFP
Primary Ports15 x RJ45 + 1 x SFP
Primary Port Speed10/100/1000Mbps
VLAN SupportYes
Jumbo Frames9216 bytes
PoEYes
StackableNo
LayerLayer 2 Only
Shipping weight2.13 kg
Package size401 × 216 × 51 mm

Questions about this item

Do I need an SFP transceiver to use the uplink port on the GS116EPP-100NAS?

Yes, the single uplink is an SFP slot, so you must supply a compatible SFP module and fibre or copper cable to connect it to another switch or router.

Will my older 10/100 Mbps devices work on the 15 RJ45 ports of this switch?

Yes, each RJ45 port auto-negotiates down to 10 or 100 Mbps, so legacy devices connect without configuration.

How can I verify the 231 W PoE budget is being used correctly after powering my access points?

Log into the Smart web interface and check the PoE status page; it shows real-time power draw per port and total consumption against the 231 W budget.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.