Neoperl
Neoperl 1452004 Aerator Assembly 1.2 GPM Aerated PK50
Aerator assembly with dual-thread outlet delivers 1.2 GPM aerated flow and pressure compensation in a 50-piece pack
- TypeTraffic & Parking Lot
- Dual thread sizes fit 15/16 in - 27 and 55/64 in - 27 outlets
- Pressure-compensating design maintains steady 1.2 gpm flow across varying supply pressure
- Aerated stream mixes air with water for splash-reduced use at the sink
- NSF 61 certified components meet drinking-water safety standards for plumbing installations
- Chrome finish resists corrosion and matches common faucet trim for a uniform look
Neoperl 1.2 GPM Aerator Assembly
The Neoperl 1452004 is a pressure-compensating aerator assembly designed for bath faucet outlets. It delivers a consistent 1.2 gallons per minute flow rate through an aerated stream. The chrome-finished unit meets NSF 61 standards for drinking water system components. Each package contains fifty assemblies for commercial or residential installation.
Fits dual-thread faucet outlets
This assembly suits outlets accepting both 15/16 inch minus 27 and 55/64 inch minus 27 thread specifications. It is not for faucets requiring a single fixed thread size or a different pitch. Buyers needing a non-aerated laminar flow outlet should select a different model. Installations demanding a flow rate above 1.2 gallons per minute cannot use this unit.
Dual-thread outlet specification
The defining specification is the dual thread size of 15/16 in - 27 and 55/64 in - 27 on a single outlet. Confirm the existing faucet spout matches one of these two thread patterns before ordering. The pressure-compensating mechanism maintains the rated 1.2 gpm flow across varying supply pressures.
Highlights
- Dual thread sizes fit 15/16 in - 27 and 55/64 in - 27 outlets
- Pressure-compensating design maintains steady 1.2 gpm flow across varying supply pressure
- Aerated stream mixes air with water for splash-reduced use at the sink
- NSF 61 certified components meet drinking-water safety standards for plumbing installations
- Chrome finish resists corrosion and matches common faucet trim for a uniform look
Specifications
| Brand | NEOPERL |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
How often will the pressure-compensating mechanism in the 1.2 GPM aerator need replacement under normal use?
The pressure-compensating aerator has no user-serviceable parts and is designed to last the life of the faucet; mineral buildup can be cleaned by soaking in vinegar.
What flow restriction appears first when the dual-thread 15/16 in - 27 and 55/64 in - 27 aerator runs continuously?
The flow is fixed at 1.2 gallons per minute by the pressure-compensating design, so no further restriction develops during sustained use.
Does the chrome-finished aerator assembly generate noticeable noise or heat when water flows all day at 1.2 GPM?
The aerated outlet produces a soft, quiet stream with no measurable heat added to the water; power consumption is zero as it operates on line pressure alone.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



