We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft

NEON Drive

NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft

SKU CH-PFT6-HDKP0

IEEE 1394 Firewire cable with 4-pin to 9-pin connectors spans 300cm (10-ft) for linking printers, scanners and external hard drives

  • TypeIEEE 1394(Firewire)
  • IEEE 1394 interface enables high-speed peripheral transfers
  • 4-pin to 9-pin male connectors link legacy and modern Firewire ports
  • 300 cm cable length provides extended reach for workstation setups
  • 10 ft length adds convenience when devices sit farther apart
  • Compatible with printers, scanners and external hard drives

IEEE 1394 cable with 4-pin to 9-pin connectors

This NEON Drive cable provides a 300cm link between Firewire devices. It suits users who need to connect legacy peripherals such as external hard drives, printers or scanners. The 4-pin to 9-pin male ends bridge the two common IEEE 1394 port sizes. The 10-ft length adds reach for awkward desk layouts.

Suits legacy Firewire gear.

The cable works with equipment that still uses IEEE 1394 ports. It helps anyone extending a short factory lead on a scanner or drive enclosure. It is not for buyers whose devices only offer USB, eSATA or SATA interfaces. The 4-pin and 9-pin plugs will not fit those sockets.

4-pin to 9-pin gender decides compatibility

Check each device for a 4-pin or 9-pin IEEE 1394 socket before ordering. One end of this cable is a 4-pin male plug, the other is a 9-pin male plug. If both ports are the same size you need a different cable. The 300cm length is fixed and cannot be altered.

Highlights

  • IEEE 1394 interface enables high-speed peripheral transfers
  • 4-pin to 9-pin male connectors link legacy and modern Firewire ports
  • 300 cm cable length provides extended reach for workstation setups
  • 10 ft length adds convenience when devices sit farther apart
  • Compatible with printers, scanners and external hard drives

Specifications

TypeIEEE 1394(Firewire)

Questions about this item

How do I connect the 4-pin to 9-pin Firewire cable and what is the common mistake?

Plug the 4-pin end into the peripheral and the 9-pin end into the host port; the common mistake is forcing the connector upside down because the keying notch is offset.

What maintenance or replacement will this 300cm IEEE 1394 cable need over time?

Inspect the strain reliefs and connector pins periodically; replace the cable if the moulded boots crack or pins become bent, as the copper cores are not user-serviceable.

What limit appears first when using this 10-foot Firewire link for sustained transfers?

The IEEE 1394 interface bandwidth is the bottleneck before the 300cm copper length introduces measurable signal loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.