NEMIX RAM 512GB 4x128GB DDR5 5600 CL46 4Rx4 ECC RDIMM memory upgrade for Supermicro X14SDW-36C-SP9F
- 512GB (4 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
512GB DDR5-6400 ECC registered RDIMM kit (4×128GB) verified for Supermicro X14SDV-36CE-SP3F at CL52 1.1V
Size 512GB 4X128GB
This 512GB kit delivers four 128GB DDR5 RDIMM modules rated at 6400MT/s with CL52 latency and 1.1V operation. It targets administrators scaling memory on Supermicro X14SDV-36CE-SP3F platforms that require registered ECC memory.
The kit fills all four channels with matched 4Rx4 modules so the memory controller sees a single validated configuration. The jump is worth it when workloads exceed current capacity or when mixed-rank populations force the board to downclock.
Each 288-pin module uses the registered architecture the X14SDV-36CE-SP3F expects, freeing the on-die controller from electrical load. ECC corrects single-bit errors in flight while the 1.1V baseline keeps power draw predictable. Verify the motherboard manual for approved population order before installation.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-744K4 |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 4X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the kit uses the 288-pin DDR5 RDIMM form factor required by the X14SDV-36CE-SP3F, so each 128 GB module seats directly in the board's DDR5 DIMM slots.
The Supermicro X14SDV-36CE-SP3F manual defines a specific DIMM population sequence; you must follow that order so all 512 GB are recognised at DDR5-6400 with CL52 timings.
No, the RDIMMs are passive hardware with no firmware or onboard battery; they run at 1.1 V and rely on the motherboard's memory controller for ECC and registered buffering.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?